<![CDATA[NanoBSD USB wireless.]]>Hello.
nanoBSD USB wireless adapter does not support ….?

I installed CF nanoBSD in 1g and does not recognize the adapter
wireless USB.

Saludos.

]]>https://forum.netgate.com/topic/17203/nanobsd-usb-wirelessRSS for NodeSat, 13 Jun 2026 12:41:43 GMTSat, 08 Aug 2009 00:53:57 GMT60<![CDATA[Reply to NanoBSD USB wireless. on Wed, 12 Aug 2009 11:41:45 GMT]]>:) thank all

Saludos.

]]>https://forum.netgate.com/post/204996https://forum.netgate.com/post/204996Wed, 12 Aug 2009 11:41:45 GMT<![CDATA[Reply to NanoBSD USB wireless. on Wed, 12 Aug 2009 04:35:04 GMT]]>I just noticed a kernel difference, I added rum to the embedded kernel. It'll be in the next snapshot built after this message (August 13 or newer for sure).

]]>https://forum.netgate.com/post/204977https://forum.netgate.com/post/204977Wed, 12 Aug 2009 04:35:04 GMT<![CDATA[Reply to NanoBSD USB wireless. on Tue, 11 Aug 2009 09:20:57 GMT]]>Take the if_rum.ko File from FreeBSD CD (/boot/kernel/)

Go in the WebGUI in "Diagnostics->Command Prompt".
Upload File over the "Upload" function.
The File will be upload to /tmp/

After Upload use also in "Diagnostics->Command Prompt" the "Execute Shell command" function to move the files to the right location.
Type in Command: "mv /tmp/*.ko /boot/kernel/" and click on "Execute"
Now the Kernel Module are on the right location.

Now edit the /boot/loader.conf File.
Go on WebGUI in "Diagnostics->Edit file".
Type in the field "Save/Load from path"  this Text: "/boot/loader.conf" and click on "Load".
Add this 2 Lines at the end:

if_rum_load="YES"
wlan_load="YES"

and click on "Save"
Reboot pfSense.

Now you can Assign you card in the WebGui over "Interfaces->assign" whit the "Plus" and configure it.

]]>https://forum.netgate.com/post/204913https://forum.netgate.com/post/204913Tue, 11 Aug 2009 09:20:57 GMT<![CDATA[Reply to NanoBSD USB wireless. on Tue, 11 Aug 2009 05:28:41 GMT]]>1.2.3-RC1 is FreeBSD 7.1, current snapshots are 7.2. It's possible there is a regression in FreeBSD related to that card. If you put it on a full install of current 1.2.3 snapshots from http://snapshots.pfsense.org does it detect it?

]]>https://forum.netgate.com/post/204885https://forum.netgate.com/post/204885Tue, 11 Aug 2009 05:28:41 GMT<![CDATA[Reply to NanoBSD USB wireless. on Sat, 08 Aug 2009 19:52:09 GMT]]>The adapter is an EW-edimax 7318USG.
When I use 1.2.3-RC1 installed on HDD, whether it recognizes
the card as Rum0.
In nanoBSD is not recognized.

Greetings.

]]>https://forum.netgate.com/post/204778https://forum.netgate.com/post/204778Sat, 08 Aug 2009 19:52:09 GMT<![CDATA[Reply to NanoBSD USB wireless. on Sat, 08 Aug 2009 02:28:25 GMT]]>The drivers are the same as every other platform. If it's supported in FreeBSD 7.2, we support it. If not, it's not supported.

]]>https://forum.netgate.com/post/204740https://forum.netgate.com/post/204740Sat, 08 Aug 2009 02:28:25 GMT