<![CDATA[Nut Setup]]>I had trouble getting nut working. These posts were helpful:
Trying to get NUT to work...
NUT port configuration "No such file"?

Essentially what I needed to do was reboot after installing the "nut" package. The reason being there are scripts in /usr/local/etc/devd/nut-usb.conf that have not been executed yet.

Previously I had gotten this working by forcing nut to run as root. However, all that is required is to reboot and then the script runs that sets the appropriate permissions on the device, and then nut works and recognized my UPS.

I am wondering if it would be possible to just restart the devd service after nut is installed? Can installing a package do that? If so, should the nut package be updated to restart devd after installation?

]]>https://forum.netgate.com/topic/172286/nut-setupRSS for NodeSun, 07 Jun 2026 20:11:36 GMTThu, 19 May 2022 13:39:08 GMT60<![CDATA[Reply to Nut Setup on Sat, 21 May 2022 21:07:24 GMT]]>@dennypage I thought I had tried the unplug/re-plug the USB cable, but I probably didn't after installing the nut package. Anyways, I am up and running and everything looks good with my slaves. Thanks.

]]>https://forum.netgate.com/post/1043196https://forum.netgate.com/post/1043196Sat, 21 May 2022 21:07:24 GMT<![CDATA[Reply to Nut Setup on Sat, 21 May 2022 20:12:42 GMT]]>@ryanm This is a very common issue. You can either reboot or just unplug and replug the USB cable. Both will address the permissions issue.

FWIW, there is an NUT package support thread that covers most issues you might encounter using the NUT package, including this one.

]]>https://forum.netgate.com/post/1043193https://forum.netgate.com/post/1043193Sat, 21 May 2022 20:12:42 GMT