Small ISP setup with public lan/wan adresses with PF 1.2.2.
-
Hi,
I have been using Pfsense for some time with public/private setup in several locations. But now i want to replace my small ISP gateway with a pfsense box. My environment looks ike this and i really need some opinion what setup is the best. The result i like to accomblish is no restriction to the public clients but traffic shaper enabled and DHCP/DNS assignment to clients via the box. PPTP client connections has to work from the LAN to WAN.
From what i have seen that even if NAT is disabled i still get pptp problems restrictions from the lan to wan which means the fw is not fully transparent. I though this GRE limitation only applied if NAT was enabled?
Remember this is a public gateway and FW/NAT is not needed if i can control the traffic in another way.
I have tested this setup with fw rules any to any and NAT disabled?
ISP–-(WAN:83.233.226.194/30)-----pfSense-----(LAN: 83.233.235.1/24) -----Wireless AP's ----- Wireles Client's
|
|
|
---------(OPT1: 192.168.1.1/24) I use this port to configuring the box when I am onsite So i can make changes without unplugging the lan.Would it be better with a transparent bridged setup here and if yes why?