<![CDATA[Bridge WAN-LAN VLAN 36 for IPTV]]>I’m looking to bridge two VLANS in PFSense and am curious to how I can get this done. I currently have Bell Internet/TV and am using an EdgeRouter from Ubiquiti. My current solution on the EdgeRouter is as followed:

ETH3 - Fibre SFP from ISP
VLAN 35 - WAN - PPPOE
VLAN 36 - IPTV - No IP

ETH2 - Trunk to switch
VLAN 1,2,3, etc - LAN
VLAN 36 - IPTV - No IP

I have the VLAN 36 interfaces on the WAN and LAN interfaces bridged. On my switch I have the TV boxes plugged into ports tagged with VLAN 36, which currently works. I’m looking at how to replicate this in PFSense, as I am unable to get it working. I have no extra config beyond the default bridge on the EdgeRouter.

Any help is appreciated!

]]>https://forum.netgate.com/topic/174354/bridge-wan-lan-vlan-36-for-iptvRSS for NodeWed, 15 Jul 2026 11:00:57 GMTThu, 25 Aug 2022 21:43:23 GMT60<![CDATA[Reply to Bridge WAN-LAN VLAN 36 for IPTV on Fri, 26 Aug 2022 00:03:28 GMT]]>Bridging and VLANs can be.... interesting!

But what you're doing isn't that complex you should be able to create a bridge with the two VLAN 36 interfaces in it.

Steve

]]>https://forum.netgate.com/post/1058727https://forum.netgate.com/post/1058727Fri, 26 Aug 2022 00:03:28 GMT