The DHCP server located on one of the Vlans does not provide any leases to the clients.
-
Hello everyone.
I am new to this forum which I find very dynamic.
Thank you to this goodwill.I have a Netgate gx7100;
I also have a ufifi controller because I have switches with tagged ports;
After an incident, it was restored;
All Vlans work except one (Vlan4):
All ports tagged on this Vlan do not retrieve ip addresses.
For example on a switch x I consider port 12 I tag it in Vlan 1,2 or 3 the pc connected to this port works perfectly with internet access.
However, if I tag this port 12 in Vlan 4 then the pc does not retrieve any valid Ip.
By setting the IP addresses for this subnet, the PCs of this Vlan communicate but I do not have internet access.
Thanks again to everyone.
I have already reviewed all the configuration on the router and Unifi controller side but I must have omitted something.
I'm really annoyed and it's been a few days already. -
@ben-3 You shouldn't be tagging the ports your pc's are connected to. They should be untagged.
The best way to help you is if you provide pictures of the config's on pfSense and switch.
Are you sure the dhcp server is enabled on vlan4?
-
@jarhead
Thanks a lot.
I'll be back later today with the pictures.