Unable to access with multiple devices through a single interface
-
Hi, posting here although my firewall logs aren't showing anything being blocked.
I have a simple 4 NIC router. One of the LAN interfaces (running DHCP) only allows the first IP in the range through. As I said, firewall logs show nothing being denied.
Even if explicitly allow traffic from the 2nd connected IP it reports no internet access. I see nothing of note on any log anywhere.
Other interfaces seem to function normally with the same config.Any troubleshooting tips?
-
@kojyu said in Unable to access with multiple devices through a single interface:
Hi, posting here although my firewall logs aren't showing anything being blocked.
I have a simple 4 NIC router. One of the LAN interfaces (running DHCP) only allows the first IP in the range through. As I said, firewall logs show nothing being denied.
Can you go to Interfaces, click that LAN/NIC, and post a screenshot of the config?
-
@kojyu Can the device ping the router? Ping out by IP (e.g. ping 8.8.8.8)? Traceroute? Check subnet masks on the router LAN and the device.
-
@steveits said in Unable to access with multiple devices through a single interface:
Check subnet masks on the router LAN and the device.
That's where I was headed too. :)