OpenVPN & IPSec with pfSense and External network
-
(192.168.20.0/24) ----------------- (external IP/24)
LAB INFRA DMZ <--- IPSec ---> Office TWO
^
|
v
Road Warrior 1 (OpenVPN client)
(192.168.18.0/24)We can't seem to get the clients on the 192.168.18.x OpenVPN tunnel (working for a long time) to talk to the External network.
The Lab Infra on 192.168.20.x does, however.
We've been through multiple articles on this forum and added in:
- Firewall rules on the WAN- allowing port 4500 IPsec NAT-T) and ISAKAMP port 500
- Firewall rules on IPSEC 142.233.210.0/24 to * * * *
- Firewall rules on OpenVPN are wide open already as previously set up
- We have two Phase 2 configs- a) LAN to External Network and 192.168.18.0/24 OpenVPN tunnel to the External Network
- Added Static Route from the External Network to the Gateway External IP for our network.
Wondering if I need to set up an interface to bridge them or what as I need the OpenVPN tunnel clients to be able to get to the External Network like the Lab Infra clients can, so I'm confused about next steps.