<![CDATA[3.1.0_9 Advanced Inbound Firewall Rule Settings broken]]>Hello- I had updated PFBlocker from 3.1.0_7 to 3.1.0_9 yesterday (on PFS 2.6), and started seeing something amiss. While I do set my chosen IPV4 feeds to "Deny Both" it's with a custom 'DST port' in Advanced Inbound Firewall Rule Settings on INBOUND- an alias with what I need open on WAN for a road-warrior VPN. No reason otherwise as PFS normally blocks unsolicited inbound. It was working in 3.1.0_7, I could see on clicking the packet count on the PFB section of the PFS dashboarad, PFB blocking just those ports. On going into PFB/IPV4 to edit, for example, PRI1, to see the Advanced Inbound... Custom DST Port is still checked, but my alias is missing, the field is blank. So I put it back in there, saved, did an update CRON, went back, and still missing. And I still see PFB 'blocking' any port inbound and not just my alias... Same problem with IPV6.

]]>https://forum.netgate.com/topic/176560/3-1-0_9-advanced-inbound-firewall-rule-settings-brokenRSS for NodeTue, 13 Oct 2026 06:07:03 GMTSun, 18 Dec 2022 15:06:34 GMT60<![CDATA[Reply to 3.1.0_9 Advanced Inbound Firewall Rule Settings broken on Fri, 24 Feb 2023 12:18:42 GMT]]>The overlay for selecting a Alias out of the already created ones does not appear and leave empty. Just entering a "known" alias and try to save lead in a empty field of the "Custom Destination"

]]>https://forum.netgate.com/post/1089945https://forum.netgate.com/post/1089945Fri, 24 Feb 2023 12:18:42 GMT<![CDATA[Reply to 3.1.0_9 Advanced Inbound Firewall Rule Settings broken on Fri, 24 Feb 2023 11:30:47 GMT]]>
  • Is this issue still a problem in version 3.2.0_3 ?
  • I ran into the same problem on pfsense+ ( 23.01 ) with pfBlock 3.2.0_3
  • I can not set a "Custom Destination" in the Advanced Inbound Firewall Rule Settings
    • Saving the IPV4 list , always leave the "Custom Destination" field empty
    • ]]>    https://forum.netgate.com/post/1089937https://forum.netgate.com/post/1089937Fri, 24 Feb 2023 11:30:47 GMT    <![CDATA[Reply to 3.1.0_9 Advanced Inbound Firewall Rule Settings broken on Sun, 01 Jan 2023 17:08:48 GMT]]>See the patch here and report back pls.

    From the Shell or pfSense GUI > Diagnostics > Command Prompt > Execute Shell Command, run this command to download the patch.

    curl -o /usr/local/www/pfblockerng/pfblockerng_category_edit.php "https://gist.githubusercontent.com/BBcan177/1a33c42d0a61f3ddd9c2f1b1d514ed83/raw"
    ]]>    https://forum.netgate.com/post/1077819https://forum.netgate.com/post/1077819Sun, 01 Jan 2023 17:08:48 GMT    <![CDATA[Reply to 3.1.0_9 Advanced Inbound Firewall Rule Settings broken on Tue, 20 Dec 2022 20:12:47 GMT]]>@tzvia
    same problem here;
    any solutions yet?

    ]]>    https://forum.netgate.com/post/1076277https://forum.netgate.com/post/1076277Tue, 20 Dec 2022 20:12:47 GMT