Tailscale - Site B can access Site A, but Site A cannot access Site B
-
Hello everyone,
I am new to Tailscale and have been wanting to set it up for a Site-to-Site VPN essentially. I followed the tutorial videos from Christian McDonald and Lawrence Systems.- I have the routes advertised on both ends
- I added the Outbound NAT mappings for the interfaces (on both sides)
- I added the pass all traffic rule for the Tailscale interface group
The problem that I am having is that my Site B can access everything on my Site A, but my Site A cannot. Mainly devices behind the Site A firewall cannot access anything on Site B, but the Site A firewall itself can ping everything on Site B.
I have checked on both sides and both firewalls have the routes in their respective routing table, I have no firewall rules on the interfaces used for testing that would block the interfaces.
Here is my Site A configuration:
The above screenshot is of a machine behind the Site A firewall.Here is from Site B's perspective:
This screenshot shows Site B pinging Site A's management interface just fine.I still haven't found anything that would be causing this, I checked the states while trying to ping some site B devices which all ended up with SYN_SENT:CLOSED, which I think means that no traffic was sent.
If there is anything else I can do to try and figure this out, let me know. I'll provide more info if I missed something. Thanks!