<![CDATA[23.02 WebGUI enable ?]]>Hi all,

Looking to enable the WebGUI on 23.02.
Cannot see any info yet in the knowledge base on how to do this.

Any Ideas?

]]>https://forum.netgate.com/topic/178895/23-02-webgui-enableRSS for NodeMon, 20 Apr 2026 21:47:01 GMTMon, 20 Mar 2023 18:05:08 GMT60<![CDATA[Reply to 23.02 WebGUI enable ? on Tue, 17 Feb 2026 22:43:28 GMT]]>@DataIdeas-Josh I've been working on Nexus for the past few years, so I don't remember the fix for your problem, but I will refer this to the team. We're also working on adding TNSR support to Nexus, so it should be easier to get setup in the future (no specific timeline yet, but expect it sometime this year).

]]>https://forum.netgate.com/post/1238195https://forum.netgate.com/post/1238195Tue, 17 Feb 2026 22:43:28 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Mon, 16 Feb 2026 02:22:54 GMT]]>While following the https://docs.netgate.com/tnsr/en/latest/recipes/gui/index.html guide. still getting the error "protocol invalid-value error HTTP cert verification failed: unable to verify the first certificate[21]"
Not quite sure why getting the error. I did everything in the guide.
Wish the gui was simpler to access rather than this over complicated way to do certs, then install, etc.

]]>https://forum.netgate.com/post/1238081https://forum.netgate.com/post/1238081Mon, 16 Feb 2026 02:22:54 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Thu, 23 Mar 2023 21:04:56 GMT]]>Agreed - great start. I have been working with TNSR for 3-4 years and have found that the CLI combined with the documentation is very useful. The added benefit of a GUI will certainly increase the adoption of the platform.

]]>https://forum.netgate.com/post/1095913https://forum.netgate.com/post/1095913Thu, 23 Mar 2023 21:04:56 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Thu, 23 Mar 2023 20:47:21 GMT]]>Great start :)

Keep up the good work !

]]>https://forum.netgate.com/post/1095911https://forum.netgate.com/post/1095911Thu, 23 Mar 2023 20:47:21 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Thu, 23 Mar 2023 20:41:24 GMT]]>@talwell Here are some images from my dev box. I believe that there will be some more marketing material coming out around this pretty soon as well. Interfaces page Edit Interfaces DialogDashboard

]]>https://forum.netgate.com/post/1095909https://forum.netgate.com/post/1095909Thu, 23 Mar 2023 20:41:24 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Thu, 23 Mar 2023 20:06:08 GMT]]>Any screenshots of the GUI?

]]>https://forum.netgate.com/post/1095899https://forum.netgate.com/post/1095899Thu, 23 Mar 2023 20:06:08 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Wed, 22 Mar 2023 19:32:28 GMT]]>@gigabitguru Hi, I'm one of the devs who worked on the GUI. Password authentication is not currently supported. Make sure that you are using the correct algorithm to export the .p12 for macOS (I believe that the docs have a section on this). Please let me know if you have any more issues.

]]>https://forum.netgate.com/post/1095739https://forum.netgate.com/post/1095739Wed, 22 Mar 2023 19:32:28 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Wed, 22 Mar 2023 03:29:03 GMT]]>@misterb Awesome find ... it's very subtly snuck in there!

I ended up importing the Let's Encrypt CA, generating some certs, and ultimately once you get RESTCONF up and running, the Web GUI will become available. Generally, following these 2 guides will get you up and running:

  • https://docs.netgate.com/tnsr/en/latest/recipes/restconf-pki-nacm/index.html
  • https://docs.netgate.com/tnsr/en/latest/recipes/gui/index.html

Admittedly, if you run with a Public CA on the box, you'll have to do a bit more import and signing work, but it's not that bad. At least we figured out how to get the Web GUI running.

I'm having an issue getting the Client Cert imported on my mac (it claims "password is incorrect" despite export via the TNSR CLI and openssl command), but that's a separate issue. And also, you could try to swap client-cert auth for password-auth, but that's not as secure so I'll just figure out the Client Cert issue.

]]>https://forum.netgate.com/post/1095604https://forum.netgate.com/post/1095604Wed, 22 Mar 2023 03:29:03 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Tue, 21 Mar 2023 21:06:29 GMT]]>@misterb said in 23.02 WebGUI enable ?:

@litmaj0r In the Netgate docs for TNSR 23.02 if you scroll down to the TNSR Configuration Example Recipes there is an entry TNSR GUI Service with Client Certificate Authentication. I haven't tried it myself yet but there seems to be a lot of info about the process.

Good find misterb, will take a look :)

]]>https://forum.netgate.com/post/1095573https://forum.netgate.com/post/1095573Tue, 21 Mar 2023 21:06:29 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Tue, 21 Mar 2023 11:13:00 GMT]]>@litmaj0r In the Netgate docs for TNSR 23.02 if you scroll down to the TNSR Configuration Example Recipes there is an entry TNSR GUI Service with Client Certificate Authentication. I haven't tried it myself yet but there seems to be a lot of info about the process.

]]>https://forum.netgate.com/post/1095451https://forum.netgate.com/post/1095451Tue, 21 Mar 2023 11:13:00 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Tue, 21 Mar 2023 07:39:04 GMT]]>@heper said in 23.02 WebGUI enable ?:

Is there a new version that has a GUI ?afaik tnsr is cli only

Read the announcement for 23.02 https://www.netgate.com/blog/tnsr-version-23.02-is-now-available

]]>https://forum.netgate.com/post/1095439https://forum.netgate.com/post/1095439Tue, 21 Mar 2023 07:39:04 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Tue, 21 Mar 2023 07:34:13 GMT]]>Is there a new version that has a GUI ?afaik tnsr is cli only

]]>https://forum.netgate.com/post/1095438https://forum.netgate.com/post/1095438Tue, 21 Mar 2023 07:34:13 GMT<![CDATA[Reply to 23.02 WebGUI enable ? on Tue, 21 Mar 2023 00:55:04 GMT]]>I'm trying to figure this out too. I poked around and found files in the expected place, /var/www, but no obvious systemd services to start (e.g. nginx). I find a few paths with /var/www in /etc but they mainly look like config files (sudo grep -R '/var/www' /etc/*)

I'm wondering if this is a service managed inside of TNSR CLI, but even there the commands to run it are not obvious.

Definitely wondering how to kick this off to test things.

]]>https://forum.netgate.com/post/1095412https://forum.netgate.com/post/1095412Tue, 21 Mar 2023 00:55:04 GMT