firewalling, Bridge mode, Frontier help
-
Good morning. I am trying to set up FPsense system on my home wifi and having some issues. First i installed PFsense on an old laptop. I used adapters to create 2 extra interfaces. One is WAN, one is LAN and the other OPT1. My problm is that, the first time i put it on the network, it worked for few minuites and stopped. SO i removed the frontier eero router and i plug the cable in the WAN interface of PFsense laptop. The i connected the LAN interface to my new router and i was able to connect to the wifi correctly for some minuites andthe SSDs won't show again. I tried to web interface in the the firewall using the extra interface but not working. The only way i can web interface is to diconnect the LAN from the router and plug it into a computer to web interface into the firewall. So i configured the firewall in bridge mode. I bridged the WAN and LAN and deleted all the rules and allow any any on the bridge and connected the lan back to the router and it still didn't work. I might be doing something wrong. ANy help will be very appreciated. Thank you