<![CDATA[OPT1 enabled and not working]]>I went through the configuration page for setting OPT1 to a lan and the options on the DHCP page aren't the same as Pfsense. I set the IP address in the ip alias section as it's the only section and the DHCP area doesn't match. The rest of the page is completed however I have zero internet. Any speedy advice?
https://docs.netgate.com/pfsense/en/latest/solutions/xg-7100/opt-lan.ht07.08.2023_Pfsense Interfaces OPT1Stephs doesnt match config support page.jpg 07.08.2023_Pfsense OPT1 configuration no internet.jpg ml

]]>https://forum.netgate.com/topic/181370/opt1-enabled-and-not-workingRSS for NodeMon, 05 Oct 2026 11:52:14 GMTSun, 09 Jul 2023 00:49:03 GMT60<![CDATA[Reply to OPT1 enabled and not working on Mon, 07 Aug 2023 03:19:14 GMT]]>@SteveITS Thank YOU.

]]>https://forum.netgate.com/post/1119231https://forum.netgate.com/post/1119231Mon, 07 Aug 2023 03:19:14 GMT<![CDATA[Reply to OPT1 enabled and not working on Sun, 09 Jul 2023 01:52:43 GMT]]>@smoses if it’s an internal interface you can’t have it get an IP via DHCP and be a DHCP server. Set it to static and set your IP range. (Note: change the mask which defaults to /32)

]]>https://forum.netgate.com/post/1114717https://forum.netgate.com/post/1114717Sun, 09 Jul 2023 01:52:43 GMT