<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[Transparent Firewall not passing traffic]]></title><description><![CDATA[<p dir="auto">I installed PFSense three days ago.  I watched Laurence's video on how to setup it up and as a transparent FW and the documentation on bridging.</p>
<p dir="auto">I configured a bridge with OPT1 and OPT2, I have WAN and LAN connected to my LAN (on two separate segments) and can access the internet from the WAN to get updates/packages.  I can also access the LAN interface to manage the device.</p>
<p dir="auto">Now when I connect my Internet router and my main firewall to OPT1 and OPT2, Internet access stops.  I have a rule in the bridge interface to allow all from any to any but it still does not pass traffic.</p>
<p dir="auto">I should mention, I have pfBlockerNG and Suricata installed and configured; Suricata is set to Not Block and pfBlockerNG has rules for GeoIP blocking and others but as a test I added an any any rule at the top so it should not prevent the traffic from passing through the bridge.</p>
<p dir="auto">I also removed the pfBlocklerNG config from the bridge interface to test and still no go.</p>
<p dir="auto">I'm sure it's newbie problem but I can't see what I did wrong.  I've been playing with Firewalls for more than 20 years but I'm stuck here, please help!</p>
]]></description><link>https://forum.netgate.com/topic/182437/transparent-firewall-not-passing-traffic</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 01:16:57 GMT</lastBuildDate><atom:link href="https://forum.netgate.com/topic/182437.rss" rel="self" type="application/rss+xml"/><pubDate>Fri, 25 Aug 2023 21:23:34 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to Transparent Firewall not passing traffic on Mon, 28 Aug 2023 13:30:36 GMT]]></title><description><![CDATA[<p dir="auto">I figured it out.</p>
<p dir="auto">My any any * * ipv4 rule did not include icmp so my pings (which I was using to determine if traffic was flowing) were being blocked.</p>
<p dir="auto">Now I know IPv4 * does not include IPV4 ICMP</p>
]]></description><link>https://forum.netgate.com/post/1122713</link><guid isPermaLink="true">https://forum.netgate.com/post/1122713</guid><dc:creator><![CDATA[Mehnock]]></dc:creator><pubDate>Mon, 28 Aug 2023 13:30:36 GMT</pubDate></item><item><title><![CDATA[Reply to Transparent Firewall not passing traffic on Mon, 28 Aug 2023 12:44:49 GMT]]></title><description><![CDATA[<p dir="auto">I looked at the firewall logs and I see my testing pings being blocked by the Default deny rule IPv4 (1000000103) rule but I cannot find this rule anywhere in my rules list.  I take it that it's a default rule.</p>
<p dir="auto">So this means to me that the traffic is not matching any of my rules so it falls into the last rule in the system; the default deny.</p>
<p dir="auto">I have a default allow rule setup on the bridge interface as well as in both bridge members (OPT1 and OPT2) but why would it not match them?</p>
]]></description><link>https://forum.netgate.com/post/1122699</link><guid isPermaLink="true">https://forum.netgate.com/post/1122699</guid><dc:creator><![CDATA[Mehnock]]></dc:creator><pubDate>Mon, 28 Aug 2023 12:44:49 GMT</pubDate></item></channel></rss>