Cluster Pfsense 2.6.
Client VPN is OpenVPN 2.5.10
I have created a second openVPN server with the wizard listening on UDP 1195.
All is working except that when connecting on server UDP 1195 the client have no access to Internet.
Each vpn client are different and have it's own configuration files.
The two Openvpn servers have same configuration (except CA and server certificate).
I notice log for 1195 connection say :
Incoming packet rejected from [AF_INET]176.x.y.z:1194[2], expected peer address: [AF_INET]176.x.y.z:1195 (allow this incoming source address/port by removing --remote or adding --float)
I double check config files :
remote 176.x.y.z 1195 udp4
So what's wrong ?

]]>https://forum.netgate.com/topic/188151/two-vpn-servers-on-udp-1194-and-1195-on-server-1195-no-acces-to-internetRSS for NodeWed, 14 Oct 2026 07:43:43 GMTMon, 13 May 2024 13:49:27 GMT60Problem solved.
Outbound NAT rules where not created by the wizzard. Duplicating rules for the fisrt server but on UDP 1195.

]]>https://forum.netgate.com/post/1168920https://forum.netgate.com/post/1168920Mon, 13 May 2024 14:34:49 GMT