<![CDATA[Traffic shaping not working]]>i've just installed pfsense rc2 today and trying out stuffs, i tried to run the traffic shaper then the setup dialog appears, i  entered some data then i saved it but after saving the setup dialog again appeared, i then closed it then i tried to see if there was traffic shaping to my surprise, NONE! what's seems to be wrong? or i just miss something.

TIA

]]>https://forum.netgate.com/topic/1889/traffic-shaping-not-workingRSS for NodeWed, 13 May 2026 18:33:15 GMTTue, 05 Sep 2006 18:36:06 GMT60<![CDATA[Reply to Traffic shaping not working on Sat, 09 Sep 2006 02:37:48 GMT]]>@jan:

my pfsense is acting a little strange, so i downloaded and installed a new pfsense iso, then i went on to configure traffic shaping but after finishing the wizard i could no longer surf, the traffic shaping does not need any rebooting, right? good thing i have a config back up w/o traffic shaping and restored it, and after a reboot, i can surf the internet again. there is definitely something wrong with my box, right?

Yep, sounds like you've got a broken clock.  Not much we can do about that I think.

–Bill

]]>https://forum.netgate.com/post/140471https://forum.netgate.com/post/140471Sat, 09 Sep 2006 02:37:48 GMT<![CDATA[Reply to Traffic shaping not working on Fri, 08 Sep 2006 15:50:58 GMT]]>my pfsense is acting a little strange, so i downloaded and installed a new pfsense iso, then i went on to configure traffic shaping but after finishing the wizard i could no longer surf, the traffic shaping does not need any rebooting, right? good thing i have a config back up w/o traffic shaping and restored it, and after a reboot, i can surf the internet again. there is definitely something wrong with my box, right?

]]>https://forum.netgate.com/post/140435https://forum.netgate.com/post/140435Fri, 08 Sep 2006 15:50:58 GMT<![CDATA[Reply to Traffic shaping not working on Wed, 06 Sep 2006 18:58:50 GMT]]>I had this happen once. It was because in the first screen where you enter your connection speeds, the WAN and LAN boxes both had LAN in them by default. I did not notice this at first, but after making sure I selected WAN in the outgoing section, it worked fine.

]]>https://forum.netgate.com/post/140358https://forum.netgate.com/post/140358Wed, 06 Sep 2006 18:58:50 GMT<![CDATA[Reply to Traffic shaping not working on Wed, 06 Sep 2006 04:03:34 GMT]]>@jan:

i know, it's wierd right? same thing with the installation process, i encountered some difficulty too, it keep on repeating a process that is already finished, does this mean that the iso i downloaded is corrupt?

The last time I saw that bug, it was due to either a bad redirect after finding that your interfaces were bogus, or another error in the wizard.  Either way, the only commit I saw that might be related was in June, well before RC2.  Please test http://www.pfsense.com/~sullrich/1.0-SNAPSHOT-09-05-06/ and see if that fixes your issue.  Thanks

–Bill

]]>https://forum.netgate.com/post/140345https://forum.netgate.com/post/140345Wed, 06 Sep 2006 04:03:34 GMT<![CDATA[Reply to Traffic shaping not working on Tue, 05 Sep 2006 19:06:59 GMT]]>Something is not correct.  What that something is, I do not know :/

]]>https://forum.netgate.com/post/140320https://forum.netgate.com/post/140320Tue, 05 Sep 2006 19:06:59 GMT<![CDATA[Reply to Traffic shaping not working on Tue, 05 Sep 2006 19:05:51 GMT]]>i know, it's wierd right? same thing with the installation process, i encountered some difficulty too, it keep on repeating a process that is already finished, does this mean that the iso i downloaded is corrupt?

]]>https://forum.netgate.com/post/140319https://forum.netgate.com/post/140319Tue, 05 Sep 2006 19:05:51 GMT<![CDATA[Reply to Traffic shaping not working on Tue, 05 Sep 2006 18:53:53 GMT]]>I cannot reproduce this.  After clicking next on the wizard it takes me to the next screen.

]]>https://forum.netgate.com/post/140318https://forum.netgate.com/post/140318Tue, 05 Sep 2006 18:53:53 GMT<![CDATA[Reply to Traffic shaping not working on Tue, 05 Sep 2006 18:51:58 GMT]]>yes i did let it finish but after finishing i always get this:

Going any further will wipe your existing shaper config! If you do not wish to continue, please click the pfSense logo at the top to return to the webConfigurator.

This wizard will guide you through setting up the pfSense traffic shaper.

it's like a never ending cycle.

]]>https://forum.netgate.com/post/140317https://forum.netgate.com/post/140317Tue, 05 Sep 2006 18:51:58 GMT<![CDATA[Reply to Traffic shaping not working on Tue, 05 Sep 2006 18:40:03 GMT]]>You need to follow the wizard and allow it to finish.

]]>https://forum.netgate.com/post/140316https://forum.netgate.com/post/140316Tue, 05 Sep 2006 18:40:03 GMT