DESPERATE--Trying to setup an SG-1100 as a firewall bridge to my lab network
-
I am new to this. This is the first actual hardware I have purchased from Netgate. I have used PfSense as a virtual firewall on Proxmox, but I am having problems.
I have Spectrum home with my own Arris Surfboard modem. I have a TpLink BE11000 as my main router. I have my printer on port 4, my Mesh TPLink Deco mesh router on port 2 which is my home network, i have a Honeypot on port 3, Port 4 goes to my Netgate sg-1100 , my Netgate goes to a Netgear gs1108PE switch and that switch is what my lab runs off of. I am trying to get an IP from the BE11000 to wan on my SG-1100 and I want LAN to route address under the 192.168.0.1 range. That is what I run my lab cluster of 8 servers from. It appears I have that all correct, but I am getting no in or out traffic through the LAN 192.168.0.1?
Am I making any sense? I want my home network to run through my mesh system and my LAB (with all kinds of cyber security labs all built through Proxmox) to be routed through my firewall under the 192.168.0.1/24 range