<![CDATA[Installer doesn't see drives]]>Just downloaded 0.95a.iso and 0.95ab.iso. I selected install to hard drive, install GUI comes up fine. But, it will not install as the installer does not see any drive. Upon boot though I do see the IDE drive identified. I swapped out drives and came up with the same issue. The drives are just standard ATA on a P-II (Compaq) desktop w/2 NICs and no other cards installed etc.. System has 512MB RAM, 2 3COM 905C cards.

I previously had installed 0.94.10 on the same machine on another drive that was pulled out for use in another machine. It is when I went to re-install PFsense I decided to see about installing a newer ver.

]]>https://forum.netgate.com/topic/197/installer-doesn-t-see-drivesRSS for NodeMon, 09 Mar 2026 23:54:14 GMTWed, 30 Nov 2005 03:07:26 GMT60<![CDATA[Reply to Installer doesn't see drives on Wed, 30 Nov 2005 05:40:45 GMT]]>Fixed in 0.95.c

]]>https://forum.netgate.com/post/132130https://forum.netgate.com/post/132130Wed, 30 Nov 2005 05:40:45 GMT