<![CDATA[pfsense log error]]>Hİ,
I reinstalled the pfsense environment and reverted to the config via the old full backup. After that, these errors are repeated in the log file.
15:40:04 pf root[35361]: /usr/sbin/service: WARNING: $expiretable_enable is not set properly - see rc.conf(5).
Apr 9 15:40:04 pf root[52858]: /usr/sbin/service: WARNING: $microcode_update_enable is not set properly - see rc.conf(5).
Apr 9 15:40:05 pf root[72074]: /usr/sbin/service: WARNING: $mpd_enable is not set properly - see rc.conf(5).
Apr 9 15:40:06 pf root[74298]: /usr/sbin/service: WARNING: $dhcp6c_enable is not set properly -

What can I do about this
Thanks.

]]>https://forum.netgate.com/topic/197116/pfsense-log-errorRSS for NodeSun, 19 Apr 2026 03:01:30 GMTFri, 11 Apr 2025 09:49:40 GMT60<![CDATA[Reply to pfsense log error on Tue, 15 Apr 2025 14:08:02 GMT]]>Yes we need more information to diagnose this. Still this? https://forum.netgate.com/topic/189542/pfsense-access-interruption

If so I suggest continuing there.

But if you're running in hyper-V still check for the reported hveventX issue: https://forum.netgate.com/post/1207821

]]>https://forum.netgate.com/post/1212361https://forum.netgate.com/post/1212361Tue, 15 Apr 2025 14:08:02 GMT<![CDATA[Reply to pfsense log error on Tue, 15 Apr 2025 09:40:05 GMT]]>@SpaceXTexnologiya said in pfsense log error:

these errors persist, Pfsense cuts off access for no reason ...

That's not much to work with.
Remember : we don't see the screen you're looking at. Neither how you install, on what hardware, etc.

]]>https://forum.netgate.com/post/1212343https://forum.netgate.com/post/1212343Tue, 15 Apr 2025 09:40:05 GMT<![CDATA[Reply to pfsense log error on Tue, 15 Apr 2025 09:20:57 GMT]]>@Gertjan @stephenw10 @patient0
I made the download.
Thank you for your help.
I have installed Pfsense but these errors persist, Pfsense cuts off access for no reason, it only recovers after a reboot.
Unfortunately I have not found a solution to this problem. Does anyone have the same problem?
version 2.7.2

]]>https://forum.netgate.com/post/1212342https://forum.netgate.com/post/1212342Tue, 15 Apr 2025 09:20:57 GMT<![CDATA[Reply to pfsense log error on Tue, 15 Apr 2025 06:27:01 GMT]]>@SpaceXTexnologiya said in pfsense log error:

Card information requested

I added 2.7.2 to the list, and checked out.
I reached :

8639a11a-bfc2-4ce6-92de-469ff5271bef-image.png

and could summit here to finalize the transaction.

Was somewhat 'hoping' to see the question "Give your Visa number of the 0 $ transaction .." but didn't saw it 😊
That is, This was valid for me, ordering from France.

]]>https://forum.netgate.com/post/1212337https://forum.netgate.com/post/1212337Tue, 15 Apr 2025 06:27:01 GMT<![CDATA[Reply to pfsense log error on Mon, 14 Apr 2025 14:59:06 GMT]]>Or, for now at least, just use the legacy installer for CE.

]]>https://forum.netgate.com/post/1212243https://forum.netgate.com/post/1212243Mon, 14 Apr 2025 14:59:06 GMT<![CDATA[Reply to pfsense log error on Mon, 14 Apr 2025 11:47:46 GMT]]>@SpaceXTexnologiya nope, you'll need an Netgate store account but since the cost is 0.- you won't need to enter any card information.

Login, add to card, checkout and download.

]]>https://forum.netgate.com/post/1212223https://forum.netgate.com/post/1212223Mon, 14 Apr 2025 11:47:46 GMT<![CDATA[Reply to pfsense log error on Mon, 14 Apr 2025 11:42:53 GMT]]>@Gertjan said in pfsense log error:

No AI or card needed : Google : pfSense download

The very first link is the official answer.

Card information requested
4d5dadd2-d213-4c13-820d-40fbc1b01aa8-image.png

]]>https://forum.netgate.com/post/1212221https://forum.netgate.com/post/1212221Mon, 14 Apr 2025 11:42:53 GMT<![CDATA[Reply to pfsense log error on Mon, 14 Apr 2025 06:51:40 GMT]]>@SpaceXTexnologiya

No AI or card needed : Google : pfSense download

The very first link is the official answer.

]]>https://forum.netgate.com/post/1212198https://forum.netgate.com/post/1212198Mon, 14 Apr 2025 06:51:40 GMT<![CDATA[Reply to pfsense log error on Mon, 14 Apr 2025 06:19:54 GMT]]>@SteveITS said in pfsense log error:

Internet.

own page asking for card details for download

]]>https://forum.netgate.com/post/1212195https://forum.netgate.com/post/1212195Mon, 14 Apr 2025 06:19:54 GMT<![CDATA[Reply to pfsense log error on Sun, 13 Apr 2025 15:54:54 GMT]]>@SpaceXTexnologiya said in pfsense log error:

Where did you get your pfSense installer from ?
downloaded from this address : https://repo.ialab.dsu.edu/pfsense/

What I wouldn’t do is download it from some place on the Internet.
https://docs.netgate.com/pfsense/en/latest/install/index.html

]]>https://forum.netgate.com/post/1212173https://forum.netgate.com/post/1212173Sun, 13 Apr 2025 15:54:54 GMT<![CDATA[Reply to pfsense log error on Sat, 12 Apr 2025 20:40:20 GMT]]>Those warnings are expected after installing pkgs which is what happens at upgrade or a clean install with the net installer. They are unrelated to the connection issues.

]]>https://forum.netgate.com/post/1212151https://forum.netgate.com/post/1212151Sat, 12 Apr 2025 20:40:20 GMT<![CDATA[Reply to pfsense log error on Sat, 12 Apr 2025 20:32:51 GMT]]>@stephenw10 said in pfsense log error:

BSD RC system.

Hi @stephenw10
Should I ignore these errors?
After reinstalling, the interruptions continue on pfsense. I'm really tired of not being able to solve this. It gets better after a restart but then it cuts out again and I have to restart pfsense again

]]>https://forum.netgate.com/post/1212123https://forum.netgate.com/post/1212123Sat, 12 Apr 2025 20:32:51 GMT<![CDATA[Reply to pfsense log error on Fri, 11 Apr 2025 20:40:27 GMT]]>You might see those after upgrading because pfSense doesn't use the FreeBSD RC system.

]]>https://forum.netgate.com/post/1212120https://forum.netgate.com/post/1212120Fri, 11 Apr 2025 20:40:27 GMT<![CDATA[Reply to pfsense log error on Fri, 11 Apr 2025 15:21:00 GMT]]>@Gertjan
Check for yourself the file /usr/local/etc/rc.d/microcode_update
The value "$$microcode_update_enable" is set : line 72 :

the value was set this way, I did not change it;

: ${microcode_update_enable="NO"}
: ${microcode_update_datadir="/usr/local/share/cpucontrol"}
: ${microcode_update_cpus="ALL"}
: ${microcode_update_flags=""}

]]>https://forum.netgate.com/post/1212067https://forum.netgate.com/post/1212067Fri, 11 Apr 2025 15:21:00 GMT<![CDATA[Reply to pfsense log error on Fri, 11 Apr 2025 15:08:31 GMT]]>@Gertjan hi,
thanks for reply

I didn't check before but I noticed these errors after returning to my config file. I was using the same config file before and I didn't get these errors.

Where did you get your pfSense installer from ?
downloaded from this address : https://repo.ialab.dsu.edu/pfsense/

]]>https://forum.netgate.com/post/1212062https://forum.netgate.com/post/1212062Fri, 11 Apr 2025 15:08:31 GMT<![CDATA[Reply to pfsense log error on Fri, 11 Apr 2025 14:26:36 GMT]]>@SpaceXTexnologiya said in pfsense log error:

expiretable_enable

These messages show up after you imported your own config.xml ?
If so (although I doubt) : reset back to default, don't use that file anymore.

@SpaceXTexnologiya said in pfsense log error:

Apr 9 15:40:04 pf root[52858]: /usr/sbin/service: WARNING: $microcode_update_enable is not set properly - see rc.conf(5)

Check for yourself the file /usr/local/etc/rc.d/microcode_update
The value "$$microcode_update_enable" is set : line 72 :

: ${microcode_update_enable="NO"}

Same for expiretable_enable, $mpd_enable and $dhcp6c_enable : these are not used at all by pfSense at all. pfSEnse doesn't 'use' rc.conf.

Where did you get your pfSense installer from ?

]]>https://forum.netgate.com/post/1212052https://forum.netgate.com/post/1212052Fri, 11 Apr 2025 14:26:36 GMT