<![CDATA[6100 Firmware 03.00.00.03t-uc-126]]>Updated my 6100 to 25.07 RC today, and just clicking around I noticed a new Firmware seems to have been installed: 03.00.00.03t-uc-126

Is this expected? I note the "latest" version appears to be an older build (uc-18):

9c993231-4a70-4ec2-8b8b-5ce7f45a522c-image.png

Also, on my Dashboard, it shows BIOS CORDOBA-03.00.00.03t - with a date of 2023-03-17 - do these BIOS and Firmware versions align?

75cb5041-2a24-404c-98b8-af592470071f-image.png

]]>https://forum.netgate.com/topic/198222/6100-firmware-03-00-00-03t-uc-126RSS for NodeSat, 13 Jun 2026 00:18:06 GMTSun, 20 Jul 2025 17:02:10 GMT60<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Sat, 30 May 2026 14:48:51 GMT]]>Hmm, interesting. That implies it's actually the microcontroller reporting that value to the driver. 🤔

]]>https://forum.netgate.com/post/1243386https://forum.netgate.com/post/1243386Sat, 30 May 2026 14:48:51 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Sat, 30 May 2026 12:32:52 GMT]]>@stephenw10 update: after warm reboot, still reporting 03.00.00.03t-uc-190

I'm not onsite to do a cold reboot, but will ask them to do it on Monday. I assume that will clear whatever this strange condition is.

]]>https://forum.netgate.com/post/1243378https://forum.netgate.com/post/1243378Sat, 30 May 2026 12:32:52 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Fri, 29 May 2026 18:00:25 GMT]]>@stephenw10 thanks I will check tonight when everyone goes home

]]>https://forum.netgate.com/post/1243352https://forum.netgate.com/post/1243352Fri, 29 May 2026 18:00:25 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Fri, 29 May 2026 16:47:59 GMT]]>Hmm, well that confirms the driver is reporting incorrectly.

If you reboot without power cycling does it still show that?

If you then power cycle does it show the expected value?

]]>https://forum.netgate.com/post/1243350https://forum.netgate.com/post/1243350Fri, 29 May 2026 16:47:59 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Fri, 29 May 2026 12:48:40 GMT]]>@stephenw10 fast forward a bit! just had this happen again on a different 6100 after an upgrade from 25.07 → 26.03.1. Haven't rebooted yet in case there are any other commands you want me to run. Things seem to be working fine.

fcd5679c-5ed8-4d3f-ab2a-4aaa18e783e7-CleanShot 2026-05-29 at 08.45.33.png

c66d1896-5e46-4e54-be67-f67ca9dbd3ec-CleanShot 2026-05-29 at 08.46.55.png

from the console:

# sysctl dev.cordbuc.0.version
dev.cordbuc.0.version: 190

# ls -ls /usr/local/share/pfSense-pkg-Netgate_Firmware_Upgrade/roms/
total 10695
 817 -rw-r--r--  1 root wheel  8388608 May 15 19:08 ADI_DFF2-01.00.00.17-nodebug.rom
3257 -rw-r--r--  1 root wheel 16777216 May 15 19:08 ADI_PLCC-01.00.00.20.bin
1073 -rw-r--r--  1 root wheel 16777216 May 15 19:08 ADI_RCC-01.00.00.18-nodebug-16m.rom
 817 -rw-r--r--  1 root wheel  8388608 May 15 19:08 ADI_RCCVE-01.00.00.17-nodebug.rom
2361 -rw-r--r--  1 root wheel  8388608 May 15 19:08 CORDOBA-03.00.00.01-2Ct-uc-15.fd
2373 -rw-r--r--  1 root wheel  8388608 May 15 19:08 CORDOBA-03.00.00.03t-uc-18.fd

# sysctl -a | grep -Ei 'cordob|cordb'
Netgate Cordoba GPIO Driver 0.4 loaded
cordbuc0: <Netgate Cordoba IO controller> at port 0x800 on isa0
gpio0: <Cordoba uC GPIO controller> on cordbuc0
dev.gpio.0.%parent: cordbuc0
dev.gpio.0.%desc: Cordoba uC GPIO controller
dev.cordbuc.0.version: 190
dev.cordbuc.0.%iommu:
dev.cordbuc.0.%parent: isa0
dev.cordbuc.0.%pnpinfo:
dev.cordbuc.0.%location:
dev.cordbuc.0.%driver: cordbuc
dev.cordbuc.0.%desc: Netgate Cordoba IO controller
dev.cordbuc.%parent:
]]>https://forum.netgate.com/post/1243333https://forum.netgate.com/post/1243333Fri, 29 May 2026 12:48:40 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Sun, 28 Sep 2025 14:55:44 GMT]]>It pretty much has to be reporting incorrectly there since that's what the gui uses but it would be good to confirm.

]]>https://forum.netgate.com/post/1226753https://forum.netgate.com/post/1226753Sun, 28 Sep 2025 14:55:44 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Sun, 28 Sep 2025 14:42:04 GMT]]>@stephenw10 Yeah, damn, I had that in my notes from the last time, but I forgot. I'll try to remember next time!

]]>https://forum.netgate.com/post/1226752https://forum.netgate.com/post/1226752Sun, 28 Sep 2025 14:42:04 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Sat, 27 Sep 2025 23:08:09 GMT]]>Hmm, if you see it again check the version reported in the sysctl:

[25.07.1-RELEASE][admin@6100.stevew.lan]/root: sysctl dev.cordbuc.0.version
dev.cordbuc.0.version: 18
]]>https://forum.netgate.com/post/1226716https://forum.netgate.com/post/1226716Sat, 27 Sep 2025 23:08:09 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Sat, 27 Sep 2025 11:57:54 GMT]]>@stephenw10 Updated to 25.11.a.20250916.0600 yesterday and noticed this came up again (little different this time, now it says 03.00.00.03t-uc-254)

7743f324-0f54-44c6-9c1b-ce4aa0212e6b-image.png

c694a0f2-2452-4e26-b775-75f8f0893182-image.png

6eb80116-d5df-4f3b-83cf-a4e5539d4fff-screen 0.png

Cold boot fixed it again. Strange.

]]>https://forum.netgate.com/post/1226692https://forum.netgate.com/post/1226692Sat, 27 Sep 2025 11:57:54 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Mon, 21 Jul 2025 17:46:36 GMT]]>Nice. Weird though. 😕

]]>https://forum.netgate.com/post/1221059https://forum.netgate.com/post/1221059Mon, 21 Jul 2025 17:46:36 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Mon, 21 Jul 2025 17:36:24 GMT]]>Thanks Steve, the full power cycle / cold boot got things sorted:

949c0768-53c3-413a-857a-77c568f0d619-image.png

👍

]]>https://forum.netgate.com/post/1221056https://forum.netgate.com/post/1221056Mon, 21 Jul 2025 17:36:24 GMT<![CDATA[Reply to 6100 Firmware 03.00.00.03t-uc-126 on Mon, 21 Jul 2025 17:26:11 GMT]]>Hmm, nope. 18 is the latest microcontroller code version.

[25.07-RC] [admin@6100.stevew.lan]/root: ls -ls /usr/local/share/pfSense-pkg-Netgate_Firmware_Upgrade/roms/
total 10695
 817 -rw-r--r--  1 root wheel  8388608 Nov 12  2024 ADI_DFF2-01.00.00.17-nodebug.rom
3257 -rw-r--r--  1 root wheel 16777216 Nov 12  2024 ADI_PLCC-01.00.00.20.bin
1073 -rw-r--r--  1 root wheel 16777216 Nov 12  2024 ADI_RCC-01.00.00.18-nodebug-16m.rom
 817 -rw-r--r--  1 root wheel  8388608 Nov 12  2024 ADI_RCCVE-01.00.00.17-nodebug.rom
2361 -rw-r--r--  1 root wheel  8388608 Nov 12  2024 CORDOBA-03.00.00.01-2Ct-uc-15.fd
2373 -rw-r--r--  1 root wheel  8388608 Nov 12  2024 CORDOBA-03.00.00.03t-uc-18.fd

[25.07-RC][admin@6100.stevew.lan]/root: sysctl dev.cordbuc.0.version
dev.cordbuc.0.version: 18

Try a full power cycle if you haven't already.

]]>https://forum.netgate.com/post/1221054https://forum.netgate.com/post/1221054Mon, 21 Jul 2025 17:26:11 GMT