25.11-RC: WAN interface SLAAC cosmetic issue
-
A minor cosmetic issue in the WAN interface configuation:
-
IPv4 type: DHCP => when selecting SLAAC or Static as IPv6 configuration type, the SLAAC/Static configuration section is placed before the DHCP (v4) config section further below. I'm used to see the IPv6 section after the IPv4 section.
-
IPv4 type PPP, PPPoE, PPTP, L2TP => the same as above
-
IPv4 type static => 'normal', SLAAC after IPv4 config section
I didn't go through all the possible other combinations :o)
The IPv6 selection:
The Config section
-
Copyright 2026 Rubicon Communications LLC (Netgate). All rights reserved.