<![CDATA[[SOLVED]Booting problem on Fabiatech FX5624]]>Hello,

I successfully installed pfsense 1.2.3 but the boot process is stuck at :

_F1 pfSense
Default: F1

_

I installed pfsense 1.2.2 on the same hardware, the boot process is stuck at the mountroot

Manual root filesystem specification:
<fstype>: <device>Mount <device>using filesystem <fstype>eg. ufs:da0s1a
? List valid disk boot devices
<empty line="">abort manual input
Mountroot></empty></fstype></device></device></fstype>

Once i specify the right root filesystem (ufs:ad1s1a) , the boot is successfull.

Anyone has an idea of the issue?

Edit : The hardware is a Fabiatech FX5624, didn't use embedded version

]]>https://forum.netgate.com/topic/20037/solved-booting-problem-on-fabiatech-fx5624RSS for NodeWed, 11 Mar 2026 06:59:27 GMTThu, 17 Dec 2009 15:19:05 GMT60<![CDATA[Reply to [SOLVED]Booting problem on Fabiatech FX5624 on Fri, 18 Dec 2009 06:59:33 GMT]]>Disabling packet mode during boot block installation solved the issue.

]]>https://forum.netgate.com/post/216683https://forum.netgate.com/post/216683Fri, 18 Dec 2009 06:59:33 GMT<![CDATA[Reply to [SOLVED]Booting problem on Fabiatech FX5624 on Thu, 17 Dec 2009 16:40:59 GMT]]>Try some of the suggestions here:

http://doc.pfsense.org/index.php/Boot_Troubleshooting

Typically what you are seeing is due to the HDD controller, or BIOS settings for the HDD controller.

]]>https://forum.netgate.com/post/216601https://forum.netgate.com/post/216601Thu, 17 Dec 2009 16:40:59 GMT