26.03-RELEASE can't switch off of RC update branch

[luckman212]

I just updated my 6100 from RC 26.03.r.20260317.0210 to 26.03-RELEASE. Everything went pretty smooth. The only exception is my update tab- it's stuck on the RC branch. See screenshots below. There are no other options available under update settings. I can't switch to Development or Stable. I've tried running the repo reset command below, but that didn't work. Any tips?

pkg-static clean -ay; pkg-static install -fy pkg; pkg-static install -xfy pfSense-repo pfSense-upgrade

The "RC Version" is the only branch available in the "Update Settings" tab

[luckman212]

Some outputs...

# pkg query -x %v pfSense-base
26.03

# pkg info -E pfSense
pfSense-26.03

# uname -K
1600011

# freebsd-version -k
16.0-CURRENT

# ls -ls /usr/local/etc/pkg/repos
total 1
1 -rw-r--r--  1 root wheel 98 Mar 20 14:21 FreeBSD.conf
1 lrwxr-xr-x  1 root wheel 55 Jan  6 21:11 pfSense.conf -> /usr/local/etc/pfSense/pkg/repos/pfSense-repo-0000.conf

# pfSense-repoc -NDJ (redacted)
OS: FreeBSD
OS Version: 16.0-CURRENT
Platform: amd64
Product: Netgate pfSense Plus
Version: 26.03-RELEASE
FS type: zfs
Language: en_US
Model: Netgate 6100
NDI: acd39e9969XXXXXXXXXX
Package prefix: pfSense-pkg-
Serial: 2028XXXXXX
Repo path: /usr/local/etc/pfSense
Request query: {"platform":"Netgate 6100","os":"FreeBSD","osver":"16.0-CURRENT","prod":"Netgate pfSense Plus","ver":"26.03-RELEASE","ed":"Plus","fstype":"zfs","pkgs":"[{\"name\":\"Cron\",\"ver\":\"0.3.8_8\"},{\"name\":\"acme\",\"ver\":\"1.1_2\"},{\"name\":\"sudo\",\"ver\":\"0.3.4\"},{\"name\":\"Filer\",\"ver\":\"0.62.2\"},{\"name\":\"Nexus\",\"ver\":\"26.03\"},{\"name\":\"iperf\",\"ver\":\"3.0.6\"},{\"name\":\"arping\",\"ver\":\"1.2.2_7\"},{\"name\":\"ANDwatch\",\"ver\":\"2.1_3\"},{\"name\":\"Shellcmd\",\"ver\":\"1.0.7\"},{\"name\":\"Tailscale\",\"ver\":\"0.1.9_2\"},{\"name\":\"WireGuard\",\"ver\":\"0.2.13_3\"},{\"name\":\"mDNS-Bridge\",\"ver\":\"2.2_4\"},{\"name\":\"System_Patches\",\"ver\":\"2.3\"},{\"name\":\"Netgate_Firmware_Upgrade\",\"ver\":\"26.03.0\"}]"}
POST data: <removed>

{
    "repos": {
        "repo": [
            {
                "abi": "FreeBSD:16:amd64",
                "altabi": "freebsd:16:x86:64",
                "conf": "RnJl...",
                "name": "26_03",
                "descr": "RC Version (26.03)",
                "default": "yes",
                "key": "MIIJ...",
                "cert": "MIIF...",
                "product": "pfSense Plus",
                "is_release": "no",
                "osversion": "1600011"
            }
        ]
    },
    "links": {
        "next": null,
        "previous": null
    },
    "count": 1,
    "messages": [
        "Your Netgate device has pfSense+ as part of your device purchase."
    ],
    "messages_text": [
        "Your Netgate device has pfSense+ as part of your device purchase.",
        "Your Netgate device has pfSense+ as part of your device purchase."
    ],
    "pubkey": {
        "type": "RSA",
        "key": "MIIC..."
    },
    "signature": {
        "type": "RSA",
        "signature": "UFLd...",
        "key_signed": "repos.repo"
    }
}
Messages:
Your Netgate device has pfSense+ as part of your device purchase.

[stephenw10]

The branches will be updated shortly when the release is completed.

[johnpoz]

@stephenw10 I was going to say I don't see 26.03 available yet.. Normally there is a full announcement, etc.. But guess its coming any time now ;)

[stephenw10]

Yup, any time now.....

[chpalmer]

@johnpoz said in 26.03-RELEASE can't switch off of RC update branch:

@stephenw10 I was going to say I don't see 26.03 available yet..

I did about 10am PDT this morning.. And even though dashboard shows 26.03 Release I too have RC on my update page still.

But I am sure things will work themselves out.. ;)

[Bob.Dig]

so close...

[mcury]

It's ready.

[mcury]

Is Netgate pulling an April Fools' prank again?
Go and Linux ?

[stephenw10]

Branches should be good now.

[luckman212]

Yep!