wan dhcp
-
My WAN interface is configured with a 300 Mbps DHCP server, but it's not reaching 10 bits. There are no firewall rules or VPN. Has anyone else experienced this?
-
@Edson-Victor-da-cruz well it being DHCP isn’t very relevant what’s the link speed on the interfaces though?
-
@Edson-Victor-da-cruz said in wan dhcp:
My WAN interface is configured with a 300 Mbps DHCP server, but it's not reaching 10 bits.
Can you rephrase that or: what is a "300 Mbps DHCP server" and what is not reaching 10 bits? What 10 bits?Can you show your WAN configuration and firewall rules for WAN and LAN
-
image url) -
@Edson-Victor-da-cruz ok, that looks like a standard DHCP IPv4 and IPv6 configured WAN interfaces. What issue are you having?
-
@patient0 This link is 1GB, but it doesn't reach 10 bits.
-
@Edson-Victor-da-cruz
show status>interfaces.Try a switch in between your pfSense and the ISP.
-
@Edson-Victor-da-cruz said in wan dhcp:
This link is 1GB, but it doesn't reach 10 bits.
What modem (model/type) have you got from your ISP, does it provide 10Gbit network? On what device is pfSense running? 10Gbit SFP+ or 10Gbit baseT connectors?
-
This thread had me at "it's not reaching 10 bits"
Grabbing
