Moving from PIX506e to pfsense
mturnow last edited by
Currently using a PIX506e with 16 outside IP's.
the IP's are nat'd to serveral servers and other machines inside the network.
How Do i set these up in pfsense. I have tried the virtual ip, but i don't think i am
doing it right. Also how do I set rules for those individaul IP's once nat'd
outside ip 184.108.40.206 maps to internal network 220.127.116.11 and allows protocols www, https, ftp
outside ip 18.104.22.168 maps to internal network 22.214.171.124 and allows protocols www, ssh, smtp
dotdash last edited by
In general, you would do something like-
- Go to Firewall, Virtual IPs. Add the outside IPs.
- Setup outside to inside maps via Firewall, NAT, 1:1
- Go to Firewall, Rules, WAN, and create rules to allow the traffic.
eg- TCP * * 126.96.36.199 80 * *
Although you could just use port-forwards instead of 1:1 NAT.