Looks "normal".

Your system has two Intel gigE NICs (called em0 and em1) and a Nvidia (motherboard?) NIC called nfe0.

Do you think there is something wrong?

no there is nothing wrong but a earlier issue was a little bit strange. I have the onboard nic which is a RTL one NOT listed in the device compatibility and a dual port Intel ethernet card Intel PRO 1000 MT which IS listed in hardware compatibility list. i was plugging the wan cable from the modem to the one port of my intel eth card (em0) and the other cable which goes to the gigabit switch to the other port of the intel gig eth card (em1). The problem was that when i plugged the wan cable on the intels port it couldn't get assigned an ip address from the ISP using DHCP. Plugged it on the onboard one and worked right away. i have to mention that even that my onboard controller is not listed in HCL it is recognised and works flawlessly.

Your system has two Intel gigE NICs (called em0 and em1) and a Nvidia (motherboard?) NIC called nfe0.

Do you think there is something wrong?

Startup output shows recognised devices, chipset etc.

Shell command
dmesg
shows the startup output.

thnx ive done it. How does this look? do you see anything goin wrong??

dmesg

Copyright 1992-2009 The FreeBSD Project.
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994
        The Regents of the University of California. All rights reserved.
FreeBSD is a registered trademark of The FreeBSD Foundation.
FreeBSD 7.2-RELEASE-p5 #0: Sun Dec  6 23:20:31 EST 2009
    sullrich@FreeBSD_7.2_pfSense_1.2.3_snaps.pfsense.org:/usr/obj.pfSense/usr/pf                                                                                                                                                            Sensesrc/src/sys/pfSense_SMP.7
Timecounter "i8254" frequency 1193182 Hz quality 0
CPU: AMD Athlon(tm) 64 X2 Dual Core Processor 4600+ (2410.99-MHz 686-class CPU)
  Origin = "AuthenticAMD"  Id = 0x40fb2  Stepping = 2
  Features=0x178bfbff <fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c   ="" mov,pat,pse36,clflush,mmx,fxsr,sse,sse2,htt="">Features2=0x2001 <sse3,cx16>AMD Features=0xea500800 <syscall,nx,mmx+,ffxsr,rdtscp,lm,3dnow!+,3dnow!>AMD Features2=0x1f <lahf,cmp,svm,extapic,cr8>Cores per package: 2
real memory  = 2080309248 (1983 MB)
avail memory = 2025648128 (1931 MB)
ACPI APIC Table: <gbt   ="" nvdaacpi="">FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs
cpu0 (BSP): APIC ID:  0
cpu1 (AP): APIC ID:  1
ioapic0: Changing APIC ID to 2
ioapic0 <version 1.1="">irqs 0-23 on motherboard
wlan: mac acl policy registered
kbd1 at kbdmux0
cryptosoft0: <software crypto="">on motherboard
padlock0: No ACE support.
acpi0: <gbt nvdaacpi="">on motherboard
acpi0: [ITHREAD]
acpi0: Power Button (fixed)
acpi0: reservation of 0, a0000 (3) failed
acpi0: reservation of 100000, 7bef0000 (3) failed
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000
acpi_timer0: <24-bit timer at 3.579545MHz> port 0x1008-0x100b on acpi0
acpi_hpet0: <high precision="" event="" timer="">iomem 0xfeff0000-0xfeff03ff on acpi0
Timecounter "HPET" frequency 25000000 Hz quality 900
acpi_button0: <power button="">on acpi0
pcib0: <acpi host-pci="" bridge="">port 0xcf8-0xcff on acpi0
pci0: <acpi pci="" bus="">on pcib0
pci0: <memory, ram="">at device 0.0 (no driver attached)
isab0: <pci-isa bridge="">at device 1.0 on pci0
isa0: <isa bus="">on isab0
pci0: <serial bus,="" smbus="">at device 1.1 (no driver attached)
pci0: <memory, ram="">at device 1.2 (no driver attached)
ohci0: <ohci (generic)="" usb="" controller="">mem 0xfb101000-0xfb101fff irq 21 at devic                                                                                                                                                            e 2.0 on pci0
ohci0: [GIANT-LOCKED]
ohci0: [ITHREAD]
usb0: OHCI version 1.0, legacy support
usb0: SMM does not respond, resetting
usb0: <ohci (generic)="" usb="" controller="">on ohci0
usb0: USB revision 1.0
uhub0: <nvidia 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr="">on usb0
uhub0: 10 ports with 10 removable, self powered
ehci0: <ehci (generic)="" usb="" 2.0="" controller="">mem 0xfb100000-0xfb1000ff irq 22 at d                                                                                                                                                            evice 2.1 on pci0
ehci0: [GIANT-LOCKED]
ehci0: [ITHREAD]
usb1: EHCI version 1.0
usb1: companion controller, 10 ports each: usb0
usb1: <ehci (generic)="" usb="" 2.0="" controller="">on ehci0
usb1: USB revision 2.0
uhub1: <nvidia 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr="">on usb1
uhub1: 10 ports with 10 removable, self powered
pcib1: <acpi pci-pci="" bridge="">at device 4.0 on pci0
pci1: <acpi pci="" bus="">on pcib1
em0: <intel(r) 1000="" pro="" network="" connection="" 6.9.6="">port 0xb000-0xb03f mem 0xfb000                                                                                                                                                            000-0xfb01ffff irq 16 at device 6.0 on pci1
em0: [FILTER]
em0: Ethernet address: 00:07:e9:0f:77:48
em1: <intel(r) 1000="" pro="" network="" connection="" 6.9.6="">port 0xb400-0xb43f mem 0xfb020                                                                                                                                                            000-0xfb03ffff irq 17 at device 6.1 on pci1
em1: [FILTER]
em1: Ethernet address: 00:07:e9:0f:77:49
atapci0: <nvidia nforce="" mcp61="" udma133="" controller="">port 0x1f0-0x1f7,0x3f6,0x170-0                                                                                                                                                            x177,0x376,0xf000-0xf00f at device 6.0 on pci0
ata0: <ata 0="" channel="">on atapci0
ata0: [ITHREAD]
ata1: <ata 1="" channel="">on atapci0
ata1: [ITHREAD]
nfe0: <nvidia nforce="" mcp61="" networking="" adapter="">port 0xcc00-0xcc07 mem 0xfb102000                                                                                                                                                            -0xfb102fff irq 23 at device 7.0 on pci0
miibus0: <mii bus="">on nfe0
rlphy0: <rtl8201l 10="" 100="" media="" interface="">PHY 1 on miibus0
rlphy0:  10baseT, 10baseT-FDX, 100baseTX, 100baseTX-FDX, auto
nfe0: Ethernet address: 00:24:1d:69:ae:47
nfe0: [FILTER]
atapci1: <nvidia nforce="" mcp61="" sata300="" controller="">port 0x9f0-0x9f7,0xbf0-0xbf3,0                                                                                                                                                            x970-0x977,0xb70-0xb73,0xe000-0xe00f mem 0xfb103000-0xfb103fff irq 20 at device                                                                                                                                                              8.0 on pci0
atapci1: [ITHREAD]
ata2: <ata 0="" channel="">on atapci1
ata2: [ITHREAD]
ata3: <ata 1="" channel="">on atapci1
ata3: [ITHREAD]
vgapci0: <vga-compatible display="">mem 0xf8000000-0xf8ffffff,0xe0000000-0xeffffff                                                                                                                                                            f,0xf9000000-0xf9ffffff irq 21 at device 13.0 on pci0
speaker0: <pc speaker="">port 0x61 on acpi0
fdc0: <floppy drive="" controller="">port 0x3f0-0x3f5,0x3f7 irq 6 drq 2 on acpi0
fdc0: [FILTER]
cpu0: <acpi cpu="">on acpi0
powernow0: <powernow! k8="">on cpu0
cpu1: <acpi cpu="">on acpi0
powernow1: <powernow! k8="">on cpu1
pmtimer0 on isa0
orm0: <isa option="" rom="">at iomem 0xd0000-0xd3fff pnpid ORM0000 on isa0
atkbdc0: <keyboard controller="" (i8042)="">at port 0x60,0x64 on isa0
atkbd0: <at keyboard="">irq 1 on atkbdc0
kbd0 at atkbd0
atkbd0: [GIANT-LOCKED]
atkbd0: [ITHREAD]
sc0: <system console="">at flags 0x100 on isa0
sc0: VGA <16 virtual consoles, flags=0x300>
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0: configured irq 4 not in bitmap of probed irqs 0
sio0: port may not be enabled
sio0 at port 0x3f8-0x3ff irq 4 flags 0x10 on isa0
sio0: type 8250 or not responding
sio0: [FILTER]
sio1: configured irq 3 not in bitmap of probed irqs 0
sio1: port may not be enabled
vga0: <generic isa="" vga="">at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0
Timecounters tick every 1.000 msec
IPsec: Initialized Security Association Processing.
ad6: 76318MB <seagate st380815as="" 4.aab="">at ata3-master SATA300
SMP: AP CPU #1 Launched!
Trying to mount root from ufs:/dev/ad6s1a
pflog0: promiscuous mode enabled
em1: link state changed to UP</seagate></generic></system></at></keyboard></isa></powernow!></acpi></powernow!></acpi></floppy></pc></vga-compatible></ata></ata></nvidia></rtl8201l></mii></nvidia></ata></ata></nvidia></intel(r)></intel(r)></acpi></acpi></nvidia></ehci></ehci></nvidia></ohci></ohci></memory,></serial></isa></pci-isa></memory,></acpi></acpi></power></high></gbt></software></version></gbt ></lahf,cmp,svm,extapic,cr8></syscall,nx,mmx+,ffxsr,rdtscp,lm,3dnow!+,3dnow!></sse3,cx16></fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,c >

Shell command
dmesg
shows the startup output.