No internet access from VLAN
-
Hello,
I've added a VLAN (VID 1), dhcp is enabled and the client gets the correct IP, but the client has no internet access, so I guess this is a firewall problem.
I've added this rule for VLAN 1:
And these are my WAN rules (default pfsense rules)
Do I maybe have to add a rule to the WAN interface?I'm using pfsense 1.2.3.
Thank you very much for any hint!
-
found the problem, "Automatic outbound NAT rule generation" was disabled, had to add a mapping for the vlan subnet.
-
Have the same problem. Could you please show me how you did the mapping for the vlan?
Thanks
-
Hi,
I am using Pfsense 1.2.3 with squid,squidguard and snort.
My network is also based on vlan. What I did was,
1. I selected - Manual Outbound NAT rule generation (Advanced Outbound NAT (AON)) - in
Firewall: NAT: Outbound2. I created static route for each vlan networks to the Physical network (LAN). (I think this is optional because I have L3 switch before Pfsense which routes all vlans to LAN network.)
This info may be useful to you.
-
-
Finally got it working.
Thanks for your help and regards