Client tunnel cannot be closed down!

0tt0

After a reboot I am now faced with a truly weird situation.

I had my OpenVPN tunnel disabled before doing the reboot but when system comes up the tunnel WAN OPT2 is showing as active on front page. When goint to VPN | OpenVPN | Client the tunnel is indeed still disabled! See pic…

And yet, the routes are not entered correctly in route tabel and external exit IP is not VPN exit point.

I had one active server on WAN when doing the reboot.

Maybe someone care to comment on this one?

UPDATE

I have now made a second reboot after turning the WAN server off and this time the interface (that is in itself not disabled) still shows up green BUT unlike earlier there is now no IP showing besides OPT2 green icon.

Maybe it is now as it should be then?

![pfsense - OpenVPN- Client_1267538634631.png](/public/imported_attachments/1/pfsense - OpenVPN- Client_1267538634631.png)
![pfsense - Status- Interfaces_1267539074860.png](/public/imported_attachments/1/pfsense - Status- Interfaces_1267539074860.png)
![pfsense - Status- Interfaces_1267539074860.png_thumb](/public/imported_attachments/1/pfsense - Status- Interfaces_1267539074860.png_thumb)