<![CDATA[Site-to-site to openwrt]]>

<![CDATA[Site-to-site to openwrt]]>Hello. I am trying to get a working site-to-site vpn setup and I am running into some problems getting it to work. Let me start off with i have googled and searched the forums and i do not see an answer to my problem. I did find two very good articles which have helped me get me as far as i have gotten.

http://leinonen.org/Softat/How_to_configure_OpenVPN_shared_key_tunnels_using_pfSense_and_OpenWRT.pdf
http://forum.pfsense.org/index.php/topic,12888.0.html

So this is my setup

10.0.2.0/24 –--> 10.0.2.1 (pfsence) 74.109.X.Y (Static ip) ---> internet ----> dynamic ip (wrt54g running tomato firmware with openvpn installed) ----->10.0.3.0/24

My goal is for any client on both subnets to see eachother.

I have attached screen shots to show my current config.

The tunnel seems to be coming up as i get no errors on either end of the connection. But i can not ping across it or ping any of the gateways (10.8.0.1 or 10.8.0.2). I assume i am missing a firewall or routing statement but i am not sure where or what to put.

can anyone provide some help and guidance what i am missing to make this work?

pfsense1.JPG_thumb

pfsense2.JPG_thumb

pfsense3.JPG_thumb

]]>https://forum.netgate.com/topic/21951/site-to-site-to-openwrtRSS for NodeWed, 22 Apr 2026 21:18:54 GMTSat, 06 Mar 2010 04:05:56 GMT60<![CDATA[Reply to Site-to-site to openwrt on Sat, 06 Mar 2010 04:06:43 GMT]]>Here is the additonal screen captures.

pfsense3-tomato1.JPG_thumb

pfsense3-tomato2.JPG_thumb

]]>https://forum.netgate.com/post/225169https://forum.netgate.com/post/225169Sat, 06 Mar 2010 04:06:43 GMT