Can only ping and see some clients?
-
just curious if this road warrior openVPN config is stable. I got it loaded on my laptop and connected back to the server at the office.
The thing is only 2 out of 10 of the private IPs show up when I connect the VPN.
I tried to read some of the other posts but nothing was really explained.I did a scan on the local network direct and can see all hosts.IP:
Then connect from VPN client in and scanned and only see the pfsense Lan IP and 1 other IP of a netgear switch.
I read to approve IPs in captive portal and to put a "pull" comment in on the config? I did this.
Any ideas? thanx
-
Can you please describe your setup, what you're trying to achieve, how you test, what works and what doesn't working.
After reading your post i'm more confused than anything.But generally: yes, OpenVPN roadwarrior is stable.
-
The Road Warrior config should be fine. If you can talk to anything at all on the LAN, it should all work – unless those stations which you cannot reach have something such as:
1. Local client firewalls on LAN systems which block ping or other services from outside your local subnet
2. Incorrect/different gateway set on the LAN system.
3. Some other routing or overlapping subnet issue on the OpenVPN client side.