How to config my CF Memory in my Bios?
-
Hi people.
I have 1 CF Memory stick 256MB on 1 Watchguard, i want to try pfsene on it, i just want to know how i setup this memory in my BIOS before i install Pfsense ???
I still dont know how to setup CHS on the BIOS, you know, for the BIOS is another HD.
Ths is all my doubt, hope some could show me the path. Thanks all for your time :D!!!
-
Maybe http://www.ls-net.com/m0n0wall-watchguard/ can help you.
-
Hi hoba.
Yes i already read that manual before, my problem is how to setup /H/S/C on the BIOS, i have been testing but no success, sometimes
start the booting process, and after 3 seconds watchguard freeze.I have been testing, the BIOS has 4 settings:
AUTOCONFIG-PHYSICAL –-with this boot and freeze after 3 seconds
AUTOCONFIG-LBA ---with this boot and freeze after 3 seconds
CHS NOT SUPPORTED ---with this doesnt even boot
NOT INSTALLED
MANUAL USER TYPE ---with this boot and freeze after 3 secondsMy CF card has 256MB, i already copy the image file of pfsense, but i still cannot boot pfsense 1.0, i have been playing with H/S/C
trying to know with settings will work, but is a lot of possibilities.I will continue with this issue, i someone has some idea i will apreciated a lot, thanks for your time :)
Hey people, maybe im wrong:
Minimum hardware requirements
All platforms:
128 megabytes of ramEmbedded:
128 megabyte compact flash cardFull installation:
2gb hard drive or largerLiveCD:
USB Keychain for configuration storageMy Hardware:
CF 256MB
RAM 64MB <–- This can be the problem...?I was thinking where can be the problem ??? ??? ???
-
It will boot up to fully working state on 64 mb BUT you will encounter random process killing later when you push it too hard or use too many features. If you get it booting you should add some RAM to make it run fine.