<?xml version="1.0" encoding="UTF-8"?><rss xmlns:dc="http://purl.org/dc/elements/1.1/" xmlns:content="http://purl.org/rss/1.0/modules/content/" xmlns:atom="http://www.w3.org/2005/Atom" version="2.0"><channel><title><![CDATA[DMA limited to UDMA33, device found non-ATA66 cable]]></title><description><![CDATA[<p dir="auto">2.0-BETA4  (i386)<br />
built on Thu Aug 26 00:12:24 EDT 2010<br />
FreeBSD 8.1-RELEASE</p>
<p dir="auto">I recently replaced my hard drive to a Sata drive and upgraded to 2.0. My Drive is first detected at UDMA133 then ultimately ends at UDMA33. What's weird is I have a Freenas box based on freebsd7.2 and it is shown as UDMA133. The motherboard,processor,cipset and bios are identical.</p>
<p dir="auto">I then loaded PfSense 1.23 back on and it's detected as UDMA133.</p>
<p dir="auto">I chesck the Freebsd 8.1 Harware compatibility list as well as the ATA4 driver and the SIS965 chipset is supported.<br />
I tried to manually set it using atacontrol, but that got me nowhere.</p>
<p dir="auto">Below is my dmesg output…..any ideas??</p>
<p dir="auto">$ dmesg<br />
Copyright (c) 1992-2010 The FreeBSD Project.<br />
Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994<br />
The Regents of the University of California. All rights reserved.<br />
FreeBSD is a registered trademark of The FreeBSD Foundation.<br />
FreeBSD 8.1-RELEASE #1: Thu Aug 26 00:00:31 EDT 2010<br />
    sullrich@FreeBSD_8.0_pfSense_2.0-snaps.pfsense.org:/usr/obj.pfSense/usr/pfSensesrc/src/sys/pfSense.8 i386<br />
Timecounter "i8254" frequency 1193182 Hz quality 0<br />
CPU: AMD Sempron(tm) Processor 3000+ (1800.07-MHz 686-class CPU)<br />
  Origin = "AuthenticAMD"  Id = 0x20fc2  Family = f  Model = 2c  Stepping = 2<br />
  Features=0x78bfbff &lt;fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2&gt;Features2=0x1 &lt;sse3&gt;AMD Features=0xe2500800 &lt;syscall,nx,mmx+,ffxsr,lm,3dnow!+,3dnow!&gt;AMD Features2=0x1 &lt;lahf&gt;real memory  = 2147483648 (2048 MB)<br />
avail memory = 2053496832 (1958 MB)<br />
ACPI APIC Table: &lt;a m="" i ="" oemapic=""&gt;ioapic0 &lt;version 1.4=""&gt;irqs 0-23 on motherboard<br />
ipw_bss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.<br />
ipw_bss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.<br />
module_register_init: MOD_LOAD (ipw_bss_fw, 0xc074f1b0, 0) error 1<br />
ipw_ibss: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.<br />
ipw_ibss: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.<br />
module_register_init: MOD_LOAD (ipw_ibss_fw, 0xc074f270, 0) error 1<br />
ipw_monitor: You need to read the LICENSE file in /usr/share/doc/legal/intel_ipw/.<br />
ipw_monitor: If you agree with the license, set legal.intel_ipw.license_ack=1 in /boot/loader.conf.<br />
module_register_init: MOD_LOAD (ipw_monitor_fw, 0xc074f330, 0) error 1<br />
wlan: mac acl policy registered<br />
wpi: You need to read the LICENSE file in /usr/share/doc/legal/intel_wpi/.<br />
wpi: If you agree with the license, set legal.intel_wpi.license_ack=1 in /boot/loader.conf.<br />
module_register_init: MOD_LOAD (wpi_fw, 0xc092f7c0, 0) error 1<br />
kbd1 at kbdmux0<br />
cryptosoft0: &lt;software crypto=""&gt;on motherboard<br />
padlock0: No ACE support.<br />
acpi0:&lt;/software&gt;&lt;/version&gt;&lt;/a&gt; &lt;a m="" i="" oemrsdt=""&gt;on motherboard<br />
acpi0: [ITHREAD]<br />
ACPI Error: Invalid type (Method) for target of Scope operator [PCI0] (Cannot override) (20100331/dswload-821)<br />
ACPI Exception: AE_AML_OPERAND_TYPE, During name lookup/catalog (20100331/psloop-326)<br />
ACPI Error (psparse-0633): Method parse/execution failed [\<em>SB</em>.PCI0] (Node 0xc5ab2740), AE_AML_OPERAND_TYPE<br />
acpi0: Power Button (fixed)<br />
acpi0: reservation of 0, a0000 (3) failed<br />
acpi0: reservation of 100000, 7ff00000 (3) failed<br />
Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000<br />
acpi_timer0: &lt;24-bit timer at 3.579545MHz&gt; port 0x808-0x80b on acpi0<br />
cpu0: &lt;acpi cpu=""&gt;on acpi0<br />
pcib0: &lt;acpi host-pci="" bridge=""&gt;port 0xcf8-0xcff on acpi0<br />
pci0: &lt;acpi pci="" bus=""&gt;on pcib0<br />
pcib1: &lt;acpi pci-pci="" bridge=""&gt;at device 1.0 on pci0<br />
pci1: &lt;acpi pci="" bus=""&gt;on pcib1<br />
vgapci0: &lt;vga-compatible display=""&gt;port 0xe800-0xe87f mem 0xd8000000-0xdfffffff,0xfebe0000-0xfebfffff irq 16 at device 0.0 on pci1<br />
isab0: &lt;pci-isa bridge=""&gt;at device 2.0 on pci0<br />
isa0: &lt;isa bus=""&gt;on isab0<br />
atapci0: &lt;sis 965="" udma133="" controller=""&gt;port 0x1f0-0x1f7,0x3f6,0x170-0x177,0x376,0xffa0-0xffaf at device 2.5 on pci0<br />
ata0: &lt;ata 0="" channel=""&gt;on atapci0<br />
ata0: [ITHREAD]<br />
ata1: &lt;ata 1="" channel=""&gt;on atapci0<br />
ata1: [ITHREAD]<br />
pci0: &lt;multimedia, audio=""&gt;at device 2.7 (no driver attached)<br />
ohci0: &lt;sis 5571="" usb="" controller=""&gt;mem 0xfeaff000-0xfeafffff irq 20 at device 3.0 on pci0<br />
ohci0: [ITHREAD]<br />
usbus0: &lt;sis 5571="" usb="" controller=""&gt;on ohci0<br />
ohci1: &lt;sis 5571="" usb="" controller=""&gt;mem 0xfeafe000-0xfeafefff irq 21 at device 3.1 on pci0<br />
ohci1: [ITHREAD]<br />
usbus1: &lt;sis 5571="" usb="" controller=""&gt;on ohci1<br />
ohci2: &lt;sis 5571="" usb="" controller=""&gt;mem 0xfeafd000-0xfeafdfff irq 22 at device 3.2 on pci0<br />
ohci2: [ITHREAD]<br />
usbus2: &lt;sis 5571="" usb="" controller=""&gt;on ohci2<br />
ehci0: &lt;ehci (generic)="" usb="" 2.0="" controller=""&gt;mem 0xfeafc000-0xfeafcfff irq 23 at device 3.3 on pci0<br />
ehci0: [ITHREAD]<br />
usbus3: EHCI version 1.0<br />
usbus3: &lt;ehci (generic)="" usb="" 2.0="" controller=""&gt;on ehci0<br />
pcib2: &lt;acpi pci-pci="" bridge=""&gt;at device 6.0 on pci0<br />
pci2: &lt;acpi pci="" bus=""&gt;on pcib2<br />
pcib3: &lt;acpi pci-pci="" bridge=""&gt;at device 7.0 on pci0<br />
pci3: &lt;acpi pci="" bus=""&gt;on pcib3<br />
atapci1: &lt;sis 965="" udma133="" controller=""&gt;port 0xd000-0xd007,0xc800-0xc803,0xc400-0xc407,0xc000-0xc003,0xb800-0xb80f irq 17 at device 8.0 on pci0<br />
atapci1: [ITHREAD]<br />
ata2: &lt;ata 0="" channel=""&gt;on atapci1<br />
ata2: [ITHREAD]<br />
ata3: &lt;ata 1="" channel=""&gt;on atapci1<br />
ata3: [ITHREAD]<br />
em0: &lt;intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.1=""&gt;port 0xb000-0xb03f mem 0xfeac0000-0xfeadffff,0xfeaa0000-0xfeabffff irq 17 at device 9.0 on pci0<br />
em0: [FILTER]<br />
em1: &lt;intel(r) 1000="" pro="" legacy="" network="" connection="" 1.0.1=""&gt;port 0xa800-0xa83f mem 0xfea60000-0xfea7ffff,0xfea40000-0xfea5ffff irq 18 at device 10.0 on pci0<br />
em1: [FILTER]<br />
pcib4: &lt;pci-pci bridge=""&gt;at device 31.0 on pci0<br />
pci4: &lt;pci bus=""&gt;on pcib4<br />
acpi_button0: &lt;power button=""&gt;on acpi0<br />
atrtc0: &lt;at realtime="" clock=""&gt;port 0x70-0x71 irq 8 on acpi0<br />
atkbdc0: &lt;keyboard controller="" (i8042)=""&gt;port 0x60,0x64 irq 1 on acpi0<br />
atkbd0: &lt;at keyboard=""&gt;irq 1 on atkbdc0<br />
kbd0 at atkbd0<br />
atkbd0: [GIANT-LOCKED]<br />
atkbd0: [ITHREAD]<br />
uart0: &lt;16550 or compatible&gt; port 0x3f8-0x3ff irq 4 flags 0x10 on acpi0<br />
uart0: [FILTER]<br />
ppc0: &lt;parallel port=""&gt;port 0x378-0x37f,0x778-0x77f irq 7 drq 3 on acpi0<br />
ppc0: Generic chipset (ECP/PS2/NIBBLE) in COMPATIBLE mode<br />
ppc0: FIFO with 16/16/16 bytes threshold<br />
ppc0: [ITHREAD]<br />
ppbus0: &lt;parallel port="" bus=""&gt;on ppc0<br />
plip0: &lt;plip network="" interface=""&gt;on ppbus0<br />
plip0: [ITHREAD]<br />
lpt0: &lt;printer&gt;on ppbus0<br />
lpt0: [ITHREAD]<br />
lpt0: Interrupt-driven port<br />
ppi0: &lt;parallel i="" o=""&gt;on ppbus0<br />
pmtimer0 on isa0<br />
orm0: &lt;isa option="" roms=""&gt;at iomem 0xc0000-0xc7fff,0xc8000-0xc8fff,0xc9000-0xc9fff pnpid ORM0000 on isa0<br />
sc0: &lt;system console=""&gt;at flags 0x100 on isa0<br />
sc0: VGA &lt;16 virtual consoles, flags=0x300&gt;<br />
vga0: &lt;generic isa="" vga=""&gt;at port 0x3c0-0x3df iomem 0xa0000-0xbffff on isa0<br />
acpi_throttle0: &lt;acpi cpu="" throttling=""&gt;on cpu0<br />
powernow0: &lt;cool<code>n'quiet k8=""&gt;on cpu0 Timecounter "TSC" frequency 1800074725 Hz quality 800 Timecounters tick every 1.000 msec IPsec: Initialized Security Association Processing. usbus0: 12Mbps Full Speed USB v1.0 usbus1: 12Mbps Full Speed USB v1.0 usbus2: 12Mbps Full Speed USB v1.0 usbus3: 480Mbps High Speed USB v2.0 acd0: CDROM &lt;cd-rom ccd-52x6s="" ysg1=""&gt;at ata0-master UDMA33 ad4: DMA limited to UDMA33, device found non-ATA66 cable ad4: 76319MB &lt;seagate st380815as="" 4.aab=""&gt;at ata2-master UDMA33 ugen0.1: &lt;sis&gt;at usbus0 uhub0: &lt;sis 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""&gt;on usbus0 ugen1.1: &lt;sis&gt;at usbus1 uhub1: &lt;sis 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""&gt;on usbus1 ugen2.1: &lt;sis&gt;at usbus2 uhub2: &lt;sis 1="" 9="" ohci="" root="" hub,="" class="" 0,="" rev="" 1.00="" 1.00,="" addr=""&gt;on usbus2 ugen3.1: &lt;sis&gt;at usbus3 uhub3: &lt;sis 1="" 9="" ehci="" root="" hub,="" class="" 0,="" rev="" 2.00="" 1.00,="" addr=""&gt;on usbus3 Root mount waiting for: usbus3 usbus2 usbus1 usbus0 uhub2: 2 ports with 2 removable, self powered uhub0: 3 ports with 3 removable, self powered uhub1: 3 ports with 3 removable, self powered Root mount waiting for: usbus3 Root mount waiting for: usbus3 Root mount waiting for: usbus3 uhub3: 8 ports with 8 removable, self powered Trying to mount root from ufs:/dev/ad4s1a ugen1.2: &lt;american power="" conversion=""&gt;at usbus1 pflog0: promiscuous mode enabled em0: link state changed to UP pid 20968 (squid), uid 62: exited on signal 6 em1: promiscuous mode enabled em1: promiscuous mode disabled em1: promiscuous mode enabled&lt;/american&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/seagate&gt;&lt;/cd-rom&gt;&lt;/cool</code>n'quiet&gt;&lt;/acpi&gt;&lt;/generic&gt;&lt;/system&gt;&lt;/isa&gt;&lt;/parallel&gt;&lt;/printer&gt;&lt;/plip&gt;&lt;/parallel&gt;&lt;/parallel&gt;&lt;/at&gt;&lt;/keyboard&gt;&lt;/at&gt;&lt;/power&gt;&lt;/pci&gt;&lt;/pci-pci&gt;&lt;/intel(r)&gt;&lt;/intel(r)&gt;&lt;/ata&gt;&lt;/ata&gt;&lt;/sis&gt;&lt;/acpi&gt;&lt;/acpi&gt;&lt;/acpi&gt;&lt;/acpi&gt;&lt;/ehci&gt;&lt;/ehci&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/sis&gt;&lt;/multimedia,&gt;&lt;/ata&gt;&lt;/ata&gt;&lt;/sis&gt;&lt;/isa&gt;&lt;/pci-isa&gt;&lt;/vga-compatible&gt;&lt;/acpi&gt;&lt;/acpi&gt;&lt;/acpi&gt;&lt;/acpi&gt;&lt;/acpi&gt;&lt;/a&gt;&lt;/lahf&gt;&lt;/syscall,nx,mmx+,ffxsr,lm,3dnow!+,3dnow!&gt;&lt;/sse3&gt;&lt;/fpu,vme,de,pse,tsc,msr,pae,mce,cx8,apic,sep,mtrr,pge,mca,cmov,pat,pse36,clflush,mmx,fxsr,sse,sse2&gt;</p>
]]></description><link>https://forum.netgate.com/topic/26212/dma-limited-to-udma33-device-found-non-ata66-cable</link><generator>RSS for Node</generator><lastBuildDate>Mon, 16 Nov 2026 00:47:41 GMT</lastBuildDate><atom:link href="https://forum.netgate.com/topic/26212.rss" rel="self" type="application/rss+xml"/><pubDate>Wed, 01 Sep 2010 03:47:55 GMT</pubDate><ttl>60</ttl><item><title><![CDATA[Reply to DMA limited to UDMA33, device found non-ATA66 cable on Wed, 01 Sep 2010 05:08:27 GMT]]></title><description><![CDATA[<p dir="auto">Don't worry, be happy! I expect its just a reporting issue because SATA drives don't use the IDE cables.</p>
<p dir="auto">Its probably worth lodging a FreeBSD PR (Problem Report) at <a href="http://www.freebsd.org/send-pr.html" target="_blank" rel="noopener noreferrer nofollow ugc">http://www.freebsd.org/send-pr.html</a> inclding both FreeBSD 7.1 and FreeBSD 8.1 startup output.</p>
<p dir="auto">I expect this particular chipset is not particularly common which could make it a challenge for the developers to test a fix.</p>
]]></description><link>https://forum.netgate.com/post/245042</link><guid isPermaLink="true">https://forum.netgate.com/post/245042</guid><dc:creator><![CDATA[wallabybob]]></dc:creator><pubDate>Wed, 01 Sep 2010 05:08:27 GMT</pubDate></item></channel></rss>