<![CDATA[1.2.3 RC1 WAN BALANCE/Failover and Wifi]]>I am thinking about share 2 WAN's (Comcast dynamic IPs - different speed) by share I mean use them both and if possible implement FAILOver/balance on 2 WAN's I have already setup OPen VPN with another location and VoIP system behind PF. So far all is ok and can't complain

Is it possible to implement failover/balance on 1.2.3 RC1 without any issues?

Additionaly I have USB Atheros dongle that I had tried to configure but no luck. All the time that interface was down.

Thank your for any advices /links

]]>https://forum.netgate.com/topic/27942/1-2-3-rc1-wan-balance-failover-and-wifiRSS for NodeFri, 10 Apr 2026 12:50:40 GMTThu, 11 Nov 2010 03:20:44 GMT60<![CDATA[Reply to 1.2.3 RC1 WAN BALANCE/Failover and Wifi on Thu, 11 Nov 2010 13:20:52 GMT]]>OK so the only way is to upgrade to 2.0  but is it enough stable? 1.2.3 still has some bughs but it is pretty stable like for small or mid size componies.

Thank You

]]>https://forum.netgate.com/post/252447https://forum.netgate.com/post/252447Thu, 11 Nov 2010 13:20:52 GMT<![CDATA[Reply to 1.2.3 RC1 WAN BALANCE/Failover and Wifi on Thu, 11 Nov 2010 10:19:25 GMT]]>@mst:

Additionaly I have USB Atheros dongle that I had tried to configure but no luck. All the time that interface was down.

Atheros USB wireless NICs aren't support until FreeBSD8 and hence pfSense 2.0.

]]>https://forum.netgate.com/post/252419https://forum.netgate.com/post/252419Thu, 11 Nov 2010 10:19:25 GMT