Can pfsense support a Box with a ADSL Modem and 3x GbE board Board
-
Hi
I want to put together a green low wattage computer that is basically a router, ADSL modem and computer which will be on 24 / 7 so I can experiment with software and hardware configurations to see what benefits such a system could have.
Can pfsense handle a situation where a computer has an ADSL modem card as well as AD3RTLANG 3x GbE Add-on board. Also I would like to run at least one other application in the same box as pfsense
Thank you ..
-
Pretty much the only internal adsl2+ card supported by pfsense is the viking card:
http://www.traverse.com.au/productview.php?product_id=115It is actually in internal router which appears to the OS as a Realtek network card so it will work with almost any OS.
Other than that you can use an external modem such as the Draytek 120 which provides a PPPOE interface to pfsense so that it has a true IP for it's WAN interface.
If anyone knows better please let me know! :D
Steve
EDIT: The Sangoma S519 looks like the same card: http://wiki.sangoma.com/wanpipe-linux-adsl2-support
There also appears to be a similar card available under several names that uses an Infineon chipset for DSL where the two above use a Conexant. http://linitx.com/viewproduct.php?prodid=12181
-
Thank you
The research starts. :)
-
If I recall correctly the AD3RTLANG has a standard PCI electrical interface. There is no way you could get sustained line rate on 3 GigE NICs over a standard PCI electrical interface. You didn't state bandwidth requirements so I don't know if you want sustained line rate on all three interfaces.