Problem with D-link DFE 580TX

[tesna]

I got problem when booting pfsense from CD when I plug 4-port D-link DFE 580TX. The error says kernel panic when detecting the 4-port nic, then auto reboot in 15 secs. But if I unplug the pci card, pfsense works perfectly. Is D-link DFE 580TX isn't supported in freebsd 6?

I already tried to boot pf sense on different machine with same 4 port card, it also gives same error.

the machine spec:
HP netserver lp 2000r
2x Pentium III 1 ghz
512 MB ram
36 GB SCSI 160 10k rpm
2x Intel onboard NIC 10/100

The reason I want to add more interfaces is I want to NAT one WAN interface to two LAN interface on different subnet (192.168.5.* and 192.168.1.*).

Any help would be much appreciated

Thanks

Tesna

[hoba]

http://www.freebsd.org/cgi/man.cgi?query=ste&sektion=4&manpath=FreeBSD+6.0-stable

Looks like they should be supported. Check your bios settings. Might be some kind of hardwareconflict.

[wolfman]

The Card is supported; I use it successful without probs!

[tesna]

update, I swap the 580TX to 570TX, and it boots and detect fine.. strange  ??? Maybe my 580TX is faulty