<![CDATA[Viewing Automatic Outbound Nat rules]]>Hello am having with my setup. I have 2 PFsense routers connected trough IPsec and a openvpn roadwarrior connection to PF1. But ever sins I set Outbound NAT to manual to have internet on the roadwarrior via PF1. it creates an issue between PF1 and PF2, the issue only arises once every week but they lose connection between PF1 and 2

racoon: ERROR: phase1 negotiation failed due to time up. 9d096a48d0469ca1:0000000000000000

The only change that I have made sins these errors started is have internet flow via PF1 by changing NAT to manual. The current manual rules are:

WAN | Openvpn subnet
WAN | Any

By knowing which rules are created in auto mode I hope to solve my issue. But any insight into my problem would be much appreciated

Edit:
Added a screanshot of the outbound rules
Naamloos.png
Naamloos.png_thumb

]]>https://forum.netgate.com/topic/29510/viewing-automatic-outbound-nat-rulesRSS for NodeMon, 05 Oct 2026 17:26:16 GMTSun, 09 Jan 2011 21:54:39 GMT60<![CDATA[Reply to Viewing Automatic Outbound Nat rules on Mon, 10 Jan 2011 11:29:45 GMT]]>At the moment am not using CARP. Perhaps using openvpn for the site to site connection would be wise, Sins am not using filtering on vpn-traffic at this moment

]]>https://forum.netgate.com/post/259958https://forum.netgate.com/post/259958Mon, 10 Jan 2011 11:29:45 GMT<![CDATA[Reply to Viewing Automatic Outbound Nat rules on Mon, 10 Jan 2011 02:49:26 GMT]]>The only difference between what you have and the automatic rules is the source "any" also applies to traffic initiated by the firewall itself, if you're using a CARP IP for IPsec that would break its outbound traffic.

]]>https://forum.netgate.com/post/259901https://forum.netgate.com/post/259901Mon, 10 Jan 2011 02:49:26 GMT