Viewing Automatic Outbound Nat rules
-
Hello am having with my setup. I have 2 PFsense routers connected trough IPsec and a openvpn roadwarrior connection to PF1. But ever sins I set Outbound NAT to manual to have internet on the roadwarrior via PF1. it creates an issue between PF1 and PF2, the issue only arises once every week but they lose connection between PF1 and 2
racoon: ERROR: phase1 negotiation failed due to time up. 9d096a48d0469ca1:0000000000000000The only change that I have made sins these errors started is have internet flow via PF1 by changing NAT to manual. The current manual rules are:
WAN | Openvpn subnet
WAN | AnyBy knowing which rules are created in auto mode I hope to solve my issue. But any insight into my problem would be much appreciated
Edit:
Added a screanshot of the outbound rules

-
The only difference between what you have and the automatic rules is the source "any" also applies to traffic initiated by the firewall itself, if you're using a CARP IP for IPsec that would break its outbound traffic.
-
At the moment am not using CARP. Perhaps using openvpn for the site to site connection would be wise, Sins am not using filtering on vpn-traffic at this moment
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy