<![CDATA[Schedule conflict with captive portal?]]>Hi all,

I got a situation with my pfsense box. I have did some search in the forum and got no clues. I don't know it is a bug or I did something not correctly.

The settings of my pfsense box is very simple. I use pfsense for NAT and use captive portal for gateway authorisation. Everything works fine before I add some scheduling rules to block some IP for certain times.

Does anyone else got this situation also?

Thanks
Bill

]]>https://forum.netgate.com/topic/30821/schedule-conflict-with-captive-portalRSS for NodeTue, 12 May 2026 09:06:14 GMTTue, 22 Feb 2011 03:11:58 GMT60<![CDATA[Reply to Schedule conflict with captive portal? on Tue, 24 May 2011 21:26:43 GMT]]>In 1.2.3 its not possible only 2.0 allows you to use schedules with CP.

]]>https://forum.netgate.com/post/280201https://forum.netgate.com/post/280201Tue, 24 May 2011 21:26:43 GMT<![CDATA[Reply to Schedule conflict with captive portal? on Tue, 24 May 2011 08:48:48 GMT]]>Hi, I have the same problem.
As soon as you define a schedule, the captive portal stops working: everyone bypasses it.
Even if you don't use the schedule at all..

You have to remove the schedule and reboot pfSense to get the captive portal working again.

I found out that this is an old problem:
http://sadsoftware.blogspot.com/2008/09/pfsense-captive-portal-with-firewall.html

I'm using pfSense 1.2.3 on an Alix board, btw.

]]>https://forum.netgate.com/post/280085https://forum.netgate.com/post/280085Tue, 24 May 2011 08:48:48 GMT<![CDATA[Reply to Schedule conflict with captive portal? on Wed, 02 Mar 2011 14:24:56 GMT]]>Can you be more specific on what is wrong?

]]>https://forum.netgate.com/post/268162https://forum.netgate.com/post/268162Wed, 02 Mar 2011 14:24:56 GMT<![CDATA[Reply to Schedule conflict with captive portal? on Tue, 22 Feb 2011 05:45:02 GMT]]>@XIII:

when you disable the rules that have schedules with them, does the problem go away? If so then it is a schedule conflict.

Thank you for suggestion. I have not trying to diables the schedule rules. I did a reinstall and have not configure the schedule rules this time.

Actually I have another two pfsense boxes. all of them run fine with captive portal and without schedule rules. And I have tried twice with captive portal and scheduling and all going wrong.

]]>https://forum.netgate.com/post/266820https://forum.netgate.com/post/266820Tue, 22 Feb 2011 05:45:02 GMT<![CDATA[Reply to Schedule conflict with captive portal? on Tue, 22 Feb 2011 05:17:53 GMT]]>when you disable the rules that have schedules with them, does the problem go away? If so then it is a schedule conflict.

]]>https://forum.netgate.com/post/266819https://forum.netgate.com/post/266819Tue, 22 Feb 2011 05:17:53 GMT