Printing Between Subnets - Multiple LAN
-
Hey everyone, I have been fighting with printing between a couple of interfaces for a while and figure it's time to ask for help. Here's my situation - the basics are that I have 2 interfaces (both physical, no VLANs hosted), with a network printer (HP LaserJet 4650n) on one of them, management consoles, etc on the other. I can print fine on the local subnet, but I can't print from the other subnet. My firewall rules allow all traffic in between them and I do not have any NAT configured between them. But I'm lost as to why this doesn't work - I have tried it with my laptop on both sides with no luck from the Mgmt subnet.
192.168.2.0/24 subnet –----- 192.168.2.63 Printer
|
|
192.168.2.254 (CARP)
|
| - pfSense
|
10.61.32.254 (CARP)
|
|
10.61.32.0/22 subnet -------- 10.61.32.120 Win 7 workstationFiltering the firewall logs I see one-way traffic only:
Any ideas on what I should be looking at?
Thanks in advance. Aaron
-
check the gateway and subnet mask settings on the printer, it may not be setup to talk outside of its subnet.
I print to a 4050n from multiple subnets without problem, and even over a port forward in one place.
-
Thanks Jim. THe addressing is all fine - there are no issues pinging or web browsing to the printer.