<![CDATA[NAT 1:1]]>Dear all,
I have more problem about to configure the Nat 1:1. I need to make Pubblic IP–--> Internal-IP. I following step bye step how describe on the Guide but doesen't work from the server (internal Ip) i don't surfing .From the another one client in the network is OK.
please helpme how do it

]]>https://forum.netgate.com/topic/33643/nat-1-1RSS for NodeTue, 13 Oct 2026 06:35:46 GMTMon, 16 May 2011 19:37:11 GMT60<![CDATA[Reply to NAT 1:1 on Tue, 17 May 2011 14:11:26 GMT]]>You also need to have a Virtual IP setup for the public IP you are using in the 1:1 NAT. Proxy ARP, IP Alias, CARP, etc.

]]>https://forum.netgate.com/post/278995https://forum.netgate.com/post/278995Tue, 17 May 2011 14:11:26 GMT<![CDATA[Reply to NAT 1:1 on Mon, 16 May 2011 19:54:41 GMT]]>I added a screenshot of my pfsense:

It NAT on WAN1
protocol to use is TCP
Source address and port is "any"

destination address is the IP of my WAN1 interface (my public IP or my dyndns)
destination port is the port I come in on WAN1

NAT IP and NAT port is the IP and port of my internal server.

NAT.jpg
NAT.jpg_thumb

]]>https://forum.netgate.com/post/278872https://forum.netgate.com/post/278872Mon, 16 May 2011 19:54:41 GMT<![CDATA[Reply to NAT 1:1 on Mon, 16 May 2011 19:50:45 GMT]]>please post a screenshot of you NAT rule and then tell us to which IP it should be NATed.
Are you using 2.0RC ?

]]>https://forum.netgate.com/post/278871https://forum.netgate.com/post/278871Mon, 16 May 2011 19:50:45 GMT