RC1, Failover, and Loadbalancer
-
I've got a firewall that fails sometimes, so I bought a second to act as a failover solution while I diagnose it. (Since I'm running RC1 on newish hardware I don't know whether to blame the hardware or the release.)
Failover is configured, and when I reboot the primary firewall:
-
Failover to the secondary happens as expected
-
LAN machines are still available
-
DMZ machines are available individually.
-
A load balance pool that points to DMZ machines is not available, even though the backup firewall shows them as online and available.
Any thoughts as to where I should be looking?
Thanks.
(edited for clarity.)
-
-
check if you have a carp on dmz and if the server's gateway on dmz are set for this carp.