Continue lost configuration
-
Hello
I have next config:
LAN 172.16.10.1/16
WAN 192.168.50.254/24
VLAN 10 (wan 1) 192.168.5.254/24
VLAN 20 (wan 2) 192.168.1.254/24
VLAN 30 (wan 3) 192.168.15.254/24squid, squidguard, freeradius, capive portal(authenticatd with freeradius)
I probe the configuration in laboratory with 2 clients(wired and wireless), and all works well, when I put pfsense in production in a college, with about 60 clients, in a certan time, usually 1 hour or less, the pfsense reboot suddently and it lost all the configuration, when restarts it ask for a setup vlans and interfaces. I don't know what's the problem, If I take the last configuration stored in /cf/config/backup and put in /cf/config/config.xml, there is all ok when I reboot, but after I put again in production, again, pfsense reboots suddently and lost all the configuration.
1.- How I can debug the problem?
2.- How I can say that take the last config from the /cf/config/backup automatically???Thanks
-
before you copy over the backup, save the one that is "bad".
It may be that something is corrupting the config or entering a value causing invalid xml, running the "bad" config through xmllint may reveal the problem.
-
How can I parse the backup config file and check the problem? maybe the ñ character, or stressed vowels(á,é,í,ó,ú)
-
If this is on 2.0, you can just run "xmllint config.xml" or whatever file you want, and it will check it for invalid xml
-
it's 1.2.3 version, how I can convert the config file to 2.0? I tried to import from webpage and I can't
-
You can restore a valid 1.2.3 config to a 2.0 system. If it doesn't work, there must be some invalid XML in it. The most common way that happens is international characters in description fields.
-
I have checked my config backup with the xmllint command and it has problems with letter ñ, I change it and I can restore the configuration from 1.2.3 to 2.0 version. Maybe that's the problems with continuous automatic reset configuration, I gonna do test to confirm that.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register LoginPrivacy Policy · Cookie Policy