Crash all the time… help mee pleaaassseeee
-
Hello.
on my pfsense router, i have this kind of crash several times a day (see screenshot).
is there a way to fix it ?
At least, is there a way that the router restart automaticly (or the computer reboot) each times it crash ?
thank you for your help.
![IMG_20110607_141911 (Copier).jpg](/public/imported_attachments/1/IMG_20110607_141911 (Copier).jpg)
![IMG_20110607_141911 (Copier).jpg_thumb](/public/imported_attachments/1/IMG_20110607_141911 (Copier).jpg_thumb) -
That seems like a driver issue.
-
Thank you for your answer.
Is there any way to find out the issue?
Or that the computer reboots each time this happens ?
Thank you
-
Fastest way is to replace that network card. dc(4) driver do seem to be faulty in some cases, that is also my own experience with them. http://doc.pfsense.org/index.php/Policy_on_FreeBSD_issues
-
thanks for your help.
dc0 is the lan card. but i don't use lan. i use only wan and wlan.
if i deactive the lan (dc0) on the assign page, is it the same than taking it out of the pc ?
thank you
-
Looks like you are using a wireless USB with Ralink chipset (run driver). What snapshot build are you using?
-
yes i use a ra3070 wlan.
is this the snapshot build information :
2.0-RC2 (i386)
built on Mon May 23 01:50:41 EDT 2011 ???? -
I'm using 2.0-RC2-IPv6 (i386) built on Sat May 21 21:38:32 EDT 2011
My run0 (Tenda W311U) is in Access Point mode. I think I've seen crashes at the PC reported in your original post but I can't recall the circumstances. I've also been testing captive portal on the box using the Tenda and I saw crashes from time to time so I switched to a different wireless device to see if it made a difference. I was suspecting an interaction between captive portal and using the run device. I'll switch back to using the run device for my wireless link and see what happens.
-
thank you.
i have deactivated the dc0 lan in the interface page, but i still have crashes several times a day…
if someone have a fix....
thank you...
-
Do you think it can help if i install these drivers ?
http://forums.freebsd.org/showthread.php?s=c529df415ef86bb8e289617ac92f5695&t=7562If yes, can you tell me which one i have to install on pfsense 2.0 ?
Thank you