NF96FL-525-LF - Please help
I've been breaking my head with trying to get pfsense installed on this. I am using the usb image. The USB boots fine, I can get to the initial PFSENSE menu, and then it hangs at
AP CPU #3 Launched!
Then nothing. I've tried booting in regular mode, and I end up with a prompt > and nothing else. Same in safe mode. If anyone could help me out I would greatly greatly appreciate it.
Ok, so I stubbornly wanted to make this work, and did! SO in case anyone else is struggling with the same board…
I had to install from a SATA dvd-rom drive, the USB would just not work with this board for some reason. Once installed, then if you have 4 nics (1 onboard, plus daughterboard w/ 3) then you also need to disable the parallel port on the integrated peripherals setting in the BIOS.
If you don't, this gives you an irq 7 interrupt broadcast storm error when plugging into re3 (nic 3). Once I did that, I finally got this to work!