<![CDATA[Alix, could not map interupt]]>

<![CDATA[Alix, could not map interupt]]>Dear all,

I have a strange problem after installig the pfsense 2.0 rc3 on my alix 2d3.
The bootup it selfeis not a problem, but after booting up i can only see one of the three build in NICs.

After searching a bit, i founda error message during boot up. It shows up during initialising vr1 and 2 which are the two interfaces which i am missing.
The error message is: could not map interupt

Does anybody has an idea how to solve this issue.

Thanks for your help.

Nimanic

]]>https://forum.netgate.com/topic/36609/alix-could-not-map-interuptRSS for NodeTue, 09 Jun 2026 21:11:52 GMTTue, 23 Aug 2011 21:03:29 GMT60<![CDATA[Reply to Alix, could not map interupt on Wed, 24 Aug 2011 09:23:04 GMT]]>–-Issue solved----

It was a wrong FW updatet i did. The alix3 update is also working on alix2 but it causing some problems.

But now i know that a wrong FW is not crashing your alix.

]]>https://forum.netgate.com/post/292986https://forum.netgate.com/post/292986Wed, 24 Aug 2011 09:23:04 GMT