<![CDATA[How install on HP Proliant with embedded RAID controller]]>(I already posted this message on adminstrative
category but I think that this is the correct place …)

Dear all,
I'm trying to install pfSense on a HP Proliant
DL 320 which have an embedded Raid 0/1 controller
and 2 SATA drive attached in Raid 1 configuration
(this because I would like to set up also
A Proxy Server - SQUID)

Starting from Live-Cd all work fine but when I chosen the 99 option
(install on hard drive) the procedure do not find any hard drive.

I see on hardware compatibility list that are supported the HP Smart Array 5
with the ‘ciss’ driver.

Some one could give me some detail about the correct procedure to install
pfSense in such platform.

Thanks a lot in advance, best regards,

Gianvito

]]>https://forum.netgate.com/topic/3726/how-install-on-hp-proliant-with-embedded-raid-controllerRSS for NodeFri, 17 Jul 2026 09:21:53 GMTFri, 09 Mar 2007 11:26:32 GMT60<![CDATA[Reply to How install on HP Proliant with embedded RAID controller on Mon, 12 Mar 2007 17:26:07 GMT]]>Thanks a lot.
Now everythinks work fine!

GV

]]>https://forum.netgate.com/post/150930https://forum.netgate.com/post/150930Mon, 12 Mar 2007 17:26:07 GMT<![CDATA[Reply to How install on HP Proliant with embedded RAID controller on Mon, 12 Mar 2007 12:48:33 GMT]]>Are you using 1.0.1 release or a snpshotbuild? The releaseversion is based on freebsd 6.1 whereas the snapshots run 6.2. Try a recent snapshot from http://snapshots.pfsense.org/FreeBSD6/RELENG_1/ . If it works with freebsd 6.2 the snapshot should work as well.

]]>https://forum.netgate.com/post/150920https://forum.netgate.com/post/150920Mon, 12 Mar 2007 12:48:33 GMT<![CDATA[Reply to How install on HP Proliant with embedded RAID controller on Mon, 12 Mar 2007 11:55:17 GMT]]>I tried to install FreeBSQ 6.2 and this work fine.
The installation process detect the hard drive installed …

Some other suggestion to perform the pfSense installation?

Thanks in advance,

GV

]]>https://forum.netgate.com/post/150918https://forum.netgate.com/post/150918Mon, 12 Mar 2007 11:55:17 GMT<![CDATA[Reply to How install on HP Proliant with embedded RAID controller on Fri, 09 Mar 2007 16:41:10 GMT]]>as long as the controller is not supported in freebsd 6.2 there will be no possibility to install pfsense on it.
have a look if there are some drivers for freebsd or if you are able to install freebsd on the proliant server…

if that works, there might be some possibilities to solve this problem...

]]>https://forum.netgate.com/post/150786https://forum.netgate.com/post/150786Fri, 09 Mar 2007 16:41:10 GMT