HOW To setup the Rule that Make Faiolover Available
-
I have configured the Load Balnce( wan + opt1 which work fine) and Failover (wan over opt1 and opt1 over wan)
I have the Latest SnapShot according to This document
http://doc.pfsense.org/index.php/Multi-Wan/Load-Balancing
NOW LoaDBalance is Working Fine
Now i want laodBalance all the traffice and when a link is down all the traffic go through other link and when both links is up the traffice goes through load Balancer
My Rules are
–----------------------------------------------------------------
Proto --- source --- port --- destination --- port --- Gateway
-------------------------------------------------------------------
1 any Lansubnet any any any any (Default Rule)2 any Lansubnet any any any LoadBalancer pool
Now HOW To setup the Rule that Make Faiolover Available
-
remove the first rule
the loadbalange and failover will work -
What you Say about These Rules
–----------------------------------------------------------------------------------------
Proto --- source --- port --- destination --- port --- Gateway1 any Lansubnet any any any LoadBalancer pool
2 any Lansubnet any Wan any FailoverPool For Wan
3 any Lansubnet any Opt1 any FailoverPool For Opt1
4 any Lansubnet any any any any (Default Rule)
Please explain for my calarity :-*
Best Regards :-* :-* :-* -
remove rule 4
and test by removing the kable of the wan interface
then plug back in
and remove the one from the opt1 interface