<![CDATA[Firewall LAN Rules]]>Thanks to all of you to giving best solution.

I am using pfSense 2.0 RC3. All is working fine. By default, firewall allow everything on LAN. I want to restrict it. I want to allow only http, https. I am not able to do this. Kindly tell me that what are the default minimum ports required by pfsense to work properly. I want to allow ftp, http, https only. Because my users are bypassing squidgaurd firewall by using https connection.

Kindly guide me.

Thanks in advance.

]]>https://forum.netgate.com/topic/37655/firewall-lan-rulesRSS for NodeWed, 17 Jun 2026 04:22:02 GMTMon, 26 Sep 2011 10:14:30 GMT60<![CDATA[Reply to Firewall LAN Rules on Mon, 26 Sep 2011 19:19:51 GMT]]>in that rule put in destination port section: you have to select other and in the red box start to type that alias name, then select correct alias.

]]>https://forum.netgate.com/post/297763https://forum.netgate.com/post/297763Mon, 26 Sep 2011 19:19:51 GMT<![CDATA[Reply to Firewall LAN Rules on Mon, 26 Sep 2011 11:52:55 GMT]]>As mentioned, I have created the alias, but during creating rule on LAN, I am not able to see my Alias name any where. Please guide.

@Metu69salemi:

Create alias with following ports
21(ftp), 53(dns), 80 & 443

name it whatever you like
then create rule (on LAN) with this alias in destination, you should use tcp/udp protocols
disable default allow rule and test

]]>https://forum.netgate.com/post/297653https://forum.netgate.com/post/297653Mon, 26 Sep 2011 11:52:55 GMT<![CDATA[Reply to Firewall LAN Rules on Mon, 26 Sep 2011 10:31:59 GMT]]>Create alias with following ports
21(ftp), 53(dns), 80 & 443

name it whatever you like
then create rule (on LAN) with this alias in destination, you should use tcp/udp protocols
disable default allow rule and test

]]>https://forum.netgate.com/post/297641https://forum.netgate.com/post/297641Mon, 26 Sep 2011 10:31:59 GMT