Cannot access webgui
-
Clean install of pfsense 2.0 on a NeoWare thin client. Have been running 1.2.3 on this same hardware for 18 months with no issues. The USB stick finally failed so I decided to start clean with 2.0.
Used the live CD, booted, set the LAN and WAN interface and then choose option 99 to install to HDD. In my case, I am installing to USB stick.
At the end of the install, it let me choose which kernel, and I choose the embedded kernel since this is a USB stick. Machine reboots, I wait for the audible chime…
I can ping 192.168.1.1, pfsense is working fine, internet working, DHCP working, etc.
However, I cannot access webgui at 192.168.1.1
Any help would be appreciated.
-
Have you tried BOTH http and https?
-
Have you tried BOTH http and https?
Yes. I also confirmed that using the live cd, the web console comes up just fine (http).
-
I re-installed, this time using the default kernel rather than the embedded kernel. Everything works fine. The webgui comes right up.
The embedded kernel and my hardware dont seem to get along.