<![CDATA[Traffic shaping IPsec]]>I have got an IPsec tunnel the pfsense in doing and I was just wondering on what the rules should be.

]]>https://forum.netgate.com/topic/3795/traffic-shaping-ipsecRSS for NodeSun, 09 Aug 2026 01:17:17 GMTThu, 15 Mar 2007 09:37:25 GMT60<![CDATA[Reply to Traffic shaping IPsec on Mon, 19 Mar 2007 14:25:42 GMT]]>Ok this is what I have now

WAN->LAN
ESP  *  *  qOthersDownH/qOthersUpH  m_Other IPSEC inbound     
   
  WAN->LAN
UDP  *  *
Port: 500  qOthersDownH/qOthersUpH  m_Other IPSEC inbound     
   
  LAN->WAN
UDP  *  *
Port: 500  qOthersUpH/qOthersDownH  m_Other IPSEC outbound     
   
  LAN->WAN
AH  *  *  qOthersUpH/qOthersDownH  m_Other IPSEC outbound     
   
  LAN->WAN
ESP  *  *  qOthersUpH/qOthersDownH  m_Other IPSEC outbound     
   
  WAN->LAN
AH  *  *  qOthersDownH/qOthersUpH  m_Other IPSEC inbound

]]>https://forum.netgate.com/post/151359https://forum.netgate.com/post/151359Mon, 19 Mar 2007 14:25:42 GMT<![CDATA[Reply to Traffic shaping IPsec on Fri, 16 Mar 2007 19:02:02 GMT]]>You have an IPSEC option when running the wizard. Set this priority to high. After it has finished go to the trafficshaper rules page and edit the IPSEC rules. change source "lan subnet" to "any". save and apply. now your ipsec will get higher priority.

]]>https://forum.netgate.com/post/151241https://forum.netgate.com/post/151241Fri, 16 Mar 2007 19:02:02 GMT<![CDATA[Reply to Traffic shaping IPsec on Fri, 16 Mar 2007 08:54:17 GMT]]>I have the PFsense setting up an IPsec tunnel to a remote site and I was wondering if I would need to setup traffic shapping to optimise the link.

]]>https://forum.netgate.com/post/151220https://forum.netgate.com/post/151220Fri, 16 Mar 2007 08:54:17 GMT<![CDATA[Reply to Traffic shaping IPsec on Thu, 15 Mar 2007 18:26:52 GMT]]>IPSEC rules are installed automatically behind the scenes.

]]>https://forum.netgate.com/post/151197https://forum.netgate.com/post/151197Thu, 15 Mar 2007 18:26:52 GMT<![CDATA[Reply to Traffic shaping IPsec on Thu, 15 Mar 2007 18:25:23 GMT]]>I don't get what you are asking for exactly. Can you give us some more details?

]]>https://forum.netgate.com/post/151196https://forum.netgate.com/post/151196Thu, 15 Mar 2007 18:25:23 GMT