<![CDATA[Route all traffic trough external proxy]]>Hello.

I have a problem with my pfsense setup.
i am running Pfsense 2.0

I want to route all traffic to a external proxyserver,
But i want it to be transparent, so i dont have to type in the proxy information on every client on the lan side.

My setup:

Wan: 10.70/16 -> Lan: 192.168.52.0/24
Proxyserver i want to route traffic to: 10.70.20.66:8080

Yes i know the wan address is an internal ip range, but this is an internal network i have setup at my workplace.

Until now, i have been using Squid in transparent mode, but that only routes port 80 trough the external proxy.
but i want to route all ports.

Is this possible to fix?

Thanks for answers.

]]>https://forum.netgate.com/topic/38154/route-all-traffic-trough-external-proxyRSS for NodeSat, 18 Jul 2026 21:52:57 GMTWed, 12 Oct 2011 11:43:20 GMT60<![CDATA[Reply to Route all traffic trough external proxy on Wed, 12 Oct 2011 12:14:11 GMT]]>Proxy is for http protocol. Squid can proxy http,FTP,https but cannot proxy ssh for example.

Redirect all ports to squid will not work.

You have to find a proxy for each protocol you want to use and https can't be transparent for many reasons.

]]>https://forum.netgate.com/post/299796https://forum.netgate.com/post/299796Wed, 12 Oct 2011 12:14:11 GMT